Cisco AIR-ANT2566P4W-RS Self-Identifying Four-Element Dual-Band Patch Antenna
- 763 412 7282
- +86 010 69614620
AIR-ANT2566P4W-RS Overview
Preserve the self-identification connection
The RS antenna includes an EEPROM for antenna identification. Cisco specifies three orange-labeled leads and one purple-labeled lead; the purple lead connects to Port A on the compatible AP. This distinguishes it from the standard R version.
Controller software is a compatibility gate
The official guide requires Catalyst 9800 controllers with IOS-XE 17.4.1 or later for the self-identifying model and excludes AireOS controllers. Check the specific AP and release combination before substitution.
RF and mounting scope
The four-element patch covers 2400–2484 MHz and 5150–5850 MHz. It uses RP-TNC connections and 91.4 cm leads. Cisco describes indoor/outdoor use; follow its orientation, grounding and mounting instructions rather than assuming any wall arrangement is acceptable.
Specify the complete installation
Record the AP, controller software and exact RS part number in the order. Request condition and mounting contents explicitly. Antenna gain does not prove controller capacity, guaranteed range or compatibility with every later radio generation.
AIR-ANT2566P4W-RS Specification
| Model | AIR-ANT2566P4W-RS |
|---|---|
| Elements | Four; dual-band MIMO patch |
| Gain | 6 dBi in each band |
| Frequency ranges | 2400–2484 MHz; 5150–5850 MHz |
| Identification lead | Purple label to compatible AP Port A |
| Controller requirement in guide | Catalyst 9800, IOS-XE 17.4.1 or later; not AireOS |
| Connection | RP-TNC |
AIR-ANT2566P4W-RS Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
AIR-ANT2566P4W-RS FAQ
What is AIR-ANT2566P4W-RS used for?
Cisco AIR-ANT2566P4W-RS Self-Identifying Four-Element Dual-Band Patch Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with AIR-ANT2566P4W-RS?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with AIR-ANT2566P4W-RS?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of AIR-ANT2566P4W-RS?
Please request a quote for AIR-ANT2566P4W-RS. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products
Related AIR-ANT2566P4W-RS
AIR-ANT2566P4W-R Cisco Antenna
AIR-ANT2566P4W-R is a four-element indoor/outdoor directional patch antenna with 6 dBi gain in both 2.4 GHz and 5 GHz bands. It uses four 36-inch plenum-rated RP-TNC male leads.
Cisco AIR-ANT2524DW-R White Dual-Band RP-TNC Dipole Antenna
AIR-ANT2524DW-R is the white, non-self-identifying dual-band dipole antenna. Cisco lists 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz.
Cisco AIR-ANT2524V4C-R Four-Element Dual-Band Ceiling Antenna
AIR-ANT2524V4C-R is a four-element indoor ceiling antenna for 2.4 and 5 GHz MIMO radios. Cisco specifies 2 dBi and 4 dBi peak gain respectively.
Cisco AIR-ANT2506 — 5.2 dBi mast-mount omnidirectional antenna
Cisco AIR-ANT2506 is a 5.2 dBi omnidirectional mast-mount antenna for 2.4 GHz WLAN radios with an RP-TNC connection. It is suitable for indoor or outdoor installation.
Cisco AIR-ANT2524DW-RS — Self-identifying dual-band dipole
Cisco AIR-ANT2524DW-RS is a white indoor dual-band antenna with self-identification circuitry, 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz. It is an antenna accessory, not an access point.
Cisco AIR-ANT24120 2.4 GHz 12 dBi Omnidirectional Mast Antenna
AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.
Cisco AIR-ANT2422DW-R Indoor 2.4 GHz Articulated Dipole Antenna
AIR-ANT2422DW-R is an indoor articulated dipole for 2.4 GHz Cisco Aironet radios with an RP-TNC connector. It is not an AP or controller.
Cisco AIR-ANT2410Y-R 2.4 GHz 10 dBi Directional Yagi Antenna
AIR-ANT2410Y-R is a six-element directional Yagi antenna with 10 dBi gain for compatible 2.4 GHz Aironet radios. Its cable terminates in an RP-TNC plug.
ISO 9001 · ISO 14001 · ISO 45001
ISO 20000 · ISO 27001 · D&B