Cisco AIR-ANT2410Y-R 2.4 GHz 10 dBi Directional Yagi Antenna
- 763 412 7282
- +86 010 69614620
AIR-ANT2410Y-R Overview
Point-to-direction RF accessory
This enclosed Yagi is an antenna, not an access point, bridge radio or WLAN controller. Cisco specifies 2400–2485 MHz operation and 55-degree horizontal and vertical beamwidths. It is intended for mast or wall installation, indoors or outdoors.
Match the polarization
The manufacturer describes vertical shipment orientation and a procedure for changing to horizontal polarization. An installer must follow the orientation and drain-hole instructions; simply rotating the assembly without that review is not an installation specification.
Account for the connection
The supplied antenna design uses a 0.91 m low-loss RG-58 lead with an RP-TNC plug. Check the radio interface and total cable path when selecting a replacement.
Quote the complete requirement
Provide the existing radio and antenna identifiers, proposed mounting surface and photographs of the installation. Confirm mounting parts, condition and commercial support terms explicitly. The antenna gain alone does not guarantee link distance or throughput. Use the full official installation guide and qualified assistance for outdoor work.
AIR-ANT2410Y-R Specification
| Model | AIR-ANT2410Y-R |
|---|---|
| Construction | Enclosed six-element Yagi |
| Frequency | 2400–2485 MHz |
| Gain | 10 dBi |
| Beamwidth | 55 degrees in horizontal and vertical planes |
| Polarization | Linear; vertical or horizontal following installation procedure |
| Interface | RP-TNC plug on 0.91 m RG-58 lead |
AIR-ANT2410Y-R Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
AIR-ANT2410Y-R FAQ
What is AIR-ANT2410Y-R used for?
Cisco AIR-ANT2410Y-R 2.4 GHz 10 dBi Directional Yagi Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with AIR-ANT2410Y-R?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with AIR-ANT2410Y-R?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of AIR-ANT2410Y-R?
Please request a quote for AIR-ANT2410Y-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products
Related AIR-ANT2410Y-R
Cisco AIR-ANT24120 2.4 GHz 12 dBi Omnidirectional Mast Antenna
AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.
Cisco AIR-ANT2414S-R — 14 dBi vertically polarized sector antenna
AIR-ANT2414S-R is a Cisco outdoor 2.4 GHz sector antenna with 90-degree azimuth coverage. Its specified 14 dBi gain includes the supplied 1.5 m cable.
Cisco AIR-ANT2422DW-R Indoor 2.4 GHz Articulated Dipole Antenna
AIR-ANT2422DW-R is an indoor articulated dipole for 2.4 GHz Cisco Aironet radios with an RP-TNC connector. It is not an AP or controller.
Cisco AIR-ANT2485P-R 2.4 GHz 8.5 dBi Single Patch Antenna
AIR-ANT2485P-R is an indoor/outdoor 8.5 dBi single patch antenna covering 2400–2484 MHz, with an RP-TNC connection. It does not include a WLAN radio.
Cisco AIR-ANT2465P-R — 6.5 dBi diversity patch antenna
Cisco AIR-ANT2465P-R is a 2.4 GHz diversity patch antenna with 6.5 dBi peak gain, vertical polarization and RP-TNC connections. It differs from the single-patch AIR-ANT2460P-R.
Cisco AIR-ANT2460P-R — 2.4 GHz single patch antenna
AIR-ANT2460P-R is a Cisco 6 dBi single-patch antenna covering 2400–2484 MHz. It uses vertical polarization and an RP-TNC connection for compatible 2.4 GHz Aironet radios.
AIR-ANT2460NP-R - Cisco Aironet 2.4-GHz MIMO Patch Antenna
AIR-ANT2460NP-R is a Cisco MIMO directional patch antenna for 2.4 GHz, rated 6 dBi and using RP-TNC. It is an antenna only.
Cisco AIR-ANT2566P4W-RS Self-Identifying Four-Element Dual-Band Patch Antenna
AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.