AIR-ANT2535SDW-R is a Cisco low-profile white dipole operating in 2.4 and 5 GHz. Cisco specifies 3 dBi at 2.4 GHz and 5 dBi at 5 GHz and one RP-TNC. This order is an antenna component, not a wireless access point, controller or subscription.
direct dipole attachment; four are required on supported four-connector APs.
Verify the number of dipoles required by the access point, connector seating, articulation or fixed orientation, polarization and clearance around each element.
Verify the target Cisco radio, connector family, number of RF ports, supported frequency band and local regulatory limit before purchase. A mechanically compatible connector does not prove radio or regulatory compatibility.
Keep cable type and length, connector weatherproofing, mounting hardware, grounding requirement and measured RF result with the asset record. Check Cisco's current lifecycle and replacement guidance before using legacy antenna stock in a new design.
Official evidence: Cisco documentation for AIR-ANT2535SDW-R.
| Exact model / SKU | AIR-ANT2535SDW-R |
| Exact antenna PID | AIR-ANT2535SDW-R |
| Frequency band | 2.4 and 5 GHz |
| Gain | 3 dBi at 2.4 GHz and 5 dBi at 5 GHz |
| Pattern and form | low-profile white dipole |
| Connector | one RP-TNC |
| Mounting role | direct dipole attachment; four are required on supported four-connector APs |
| Access point included | No |
| Purchase checks | Radio compatibility, RF-port count, connector, survey pattern, cable loss, mount, grounding and regulatory limit |
| Source match | AIR-ANT2535SDW-R: exact frequency, gain, pattern, connector and mounting role mapped to Cisco documentation |
| Official manufacturer reference | Cisco official AIR-ANT2535SDW-R documentation |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
AIR-ANT2535SDW-R - Cisco Aironet Short Dual-Band Omni Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
Please request a quote for AIR-ANT2535SDW-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.

AIR-ANT2524DW-R is the white, non-self-identifying dual-band dipole antenna. Cisco lists 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz.

AIR-ANT2524V4C-R is a four-element indoor ceiling antenna for 2.4 and 5 GHz MIMO radios. Cisco specifies 2 dBi and 4 dBi peak gain respectively.

Cisco AIR-ANT2506 is a 5.2 dBi omnidirectional mast-mount antenna for 2.4 GHz WLAN radios with an RP-TNC connection. It is suitable for indoor or outdoor installation.

Cisco AIR-ANT2524DW-RS is a white indoor dual-band antenna with self-identification circuitry, 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz. It is an antenna accessory, not an access point.

AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.

AIR-ANT2422DW-R is an indoor articulated dipole for 2.4 GHz Cisco Aironet radios with an RP-TNC connector. It is not an AP or controller.

AIR-ANT2410Y-R is a six-element directional Yagi antenna with 10 dBi gain for compatible 2.4 GHz Aironet radios. Its cable terminates in an RP-TNC plug.