EXACT MODULAR GATEWAY BUNDLE BOUNDARY
Juniper SRX5400X-B3 Bundle Configuration Guide
Verify the exact SRX5400X-B3 enhanced-midplane chassis, control, processing, power and 100G/10G interface-card components before ordering.
What SRX5400X-B3 identifies
SRX5400X-B3 is a configured SRX5400X Bundle, not a chassis-only PID. Juniper's ordering table ties B3 to an enhanced-midplane chassis and named control, processing, power, cooling and interface components.
Official Bundle components
| Configuration field | Documented component |
|---|---|
| Chassis identity | SRX5400X with enhanced midplane |
| Routing Engine | SRX5K-RE-1800X4 |
| Switch Control Board | SRX5K-SCB3 |
| Power and cooling | Two high-capacity PEMs and one high-capacity fan tray |
| Services Processing Card | SRX5K-SPC-4-15-320 |
| Interface card | SRX5K-MPC3-100G10G |
| Interface-card role | Fixed configuration with two 100GbE and four 10GbE ports |
Checks before ordering
- Use the complete B3 PID; do not substitute B1, B2 or a chassis-only record.
- Confirm that every named card remains available and supported for the planned Junos release.
- Specify optics separately for the 100GbE and 10GbE interfaces.
- Validate AC or DC power details in the final bill of materials because the B3 label alone does not state a regional power cord.
- Record any additional SPC, interface, subscription or support items separately from the base Bundle.
Official Juniper sources
- Juniper SRX5400, SRX5600 and SRX5800 Services Gateways Datasheet
- Juniper SRX5400 Firewall Hardware Guide
- Juniper SRX5400 Line Cards and Modules
- Juniper SRX5400 Power System
This independent Bundle guide is not a Juniper publication. Revalidate current component availability, Junos support, power and optics against the final Juniper configuration.