OUTDOOR WLAN PROCUREMENT
Aruba AP-577 TAA Regional Model Selection Guide
Keep the EG, IL, JP and RW AP-577 TAA order lines distinct while validating country approval, directional coverage, power, mounting and software support.
AP-577 is the platform; the PID selects the region
HPE Aruba Networking identifies the AP-577 as an outdoor Wi-Fi 6 access point with internal directional antennas. The four product IDs below are TAA variants for different regulatory domains. Their shared enclosure and radio platform do not make the regional PIDs interchangeable.
Use the exact PID in the bill of materials, receiving record and controller inventory. Confirm that the destination country is covered by the selected regulatory model and current software release. Never use the “RW” label as a substitute for a country-specific approval check.
Four exact TAA regional order lines
| Part number | Official HPE identity | Regional marker | Procurement boundary |
|---|---|---|---|
| R4H34A | AP-577 (EGF1) TAA dual-radio outdoor AP | EG | Use only after validating the intended Egypt regulatory deployment. |
| R4H35A | AP-577 (ILF1) TAA dual-radio outdoor AP | IL | Use only after validating the intended Israel regulatory deployment. |
| R4H36A | AP-577 (JPF1) TAA dual-radio outdoor AP | JP | Use only after validating the intended Japan regulatory deployment. |
| R4H37A | AP-577 (RWF1) TAA dual-radio outdoor AP | RW | Confirm the destination country is covered by the current rest-of-world mapping. |
HPE's current QuickSpecs describes all four as AP-577 TAA dual-radio 2x2/4x4 Wi-Fi 6 outdoor access points with internal directional antennas. Region and compliance identity remain part of the order line even where the base hardware description is shared.
Directional outdoor deployment needs a site record
An internal directional antenna makes orientation part of the design. Preserve the mounting location, azimuth, elevation, intended coverage area, channel plan, transmit-power policy and survey result. Confirm the approved mounting hardware, grounding, surge protection, cable path and power source against the current installation guide.
Before rollout, verify the selected AP-577 PID against the controller or cloud-management architecture and supported software matrix. Pilot adoption, regulatory-domain behavior, client connectivity and failover on the exact regional model. A successful test on another AP-577 PID does not prove that the requested region code is correct.
AP-577 order and acceptance checklist
- Specify the complete PID: require R4H34A, R4H35A, R4H36A or R4H37A rather than “AP-577” alone.
- Confirm country approval: map the installation country to the current HPE regulatory model.
- Retain TAA identity: reconcile the quote and chassis label with the required TAA order line.
- Review RF direction: record orientation and the surveyed coverage objective for the internal directional antenna.
- Validate infrastructure: check power, mounting, grounding, surge protection, cabling and environmental requirements.
- Check management support: record the controller, gateway or cloud platform and exact software release.
- Test the delivered unit: preserve PID, serial, adoption, country setting, channel, power and client test evidence.
Exact product records
Open the region-specific product record rather than treating AP-577 as one universal order line.
Official manufacturer sources
- HPE Aruba Networking 570 Series Outdoor Access Points QuickSpecs
- HPE Aruba Networking 570 Series data sheet
- HPE Aruba Networking 570 Series ordering guide
This independent selection guide is not an HPE Aruba Networking publication and does not claim partner authorization. Confirm the current regulatory model, software support, mounting, power and environmental requirements directly with HPE before purchase or installation.