S6730-H24X6C provides 24 fixed 10GE SFP+ ports and six QSFP28 uplink ports in a 1U chassis. Huawei identifies multiple BOMs under this model, including 02352FSG variants and 02353GFC, with different default QSFP28 rate and license behavior.
For 02352FSG and 02352FSG-009 units with applicable factory releases, Huawei documents a 40 Gbit/s default for the QSFP28 interfaces and requires the corresponding license before changing them to 100GE. For part number 02353GFC, Huawei states that the license is loaded by default and the interfaces default to 100 Gbit/s. Software history can preserve a previous port-rate setting, so inspect both the BOM and running configuration.
Huawei's command reference requires a restart after changing the QSFP28 maximum rate and warns that original interface configuration may be lost. Back up the configuration, record optic and breakout use, verify the license file and schedule a maintenance window before conversion.
Huawei S6730-H24X6C port-rate command reference | Huawei S6730-H24X6C support page
| Exact model / SKU | S6730-H24X6C |
| Exact model | S6730-H24X6C |
| Fixed downlink ports | 24 x 10GE SFP+ |
| Uplink hardware | 6 x QSFP28; effective 40GE or 100GE behavior depends on BOM, software and license |
| 02352FSG / 02352FSG-009 | Huawei documents a 40GE default in applicable factory releases and a license requirement for 100GE conversion |
| 02353GFC | Huawei documents the 100GE license as loaded by default and the interfaces as 100GE by default |
| Rate-change command | assign port-type 100ge |
| Restart requirement | A device restart is required for the port-type change to take effect |
| Configuration warning | Back up the interface configuration because the original configuration may be lost after restart |
| Physical format | 1U fixed switch |
| Source match | Exact S6730-H24X6C port layout and BOM-specific 40GE/100GE default, license and restart behavior from official Huawei command and support documentation |
| Official manufacturer reference | Huawei S6730-H24X6C port-rate command reference |
Fixed ports | 24 x 10 Gig SFP+, 6 x 40/100 Gig QSFP28 |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Chassis height(U) | 1U |
Input voltage | • AC Power - Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz • DC Power - Rated DC voltage: –48V~–60V - Max. DC voltage:-38.4V DC~-72V DC |
Input current | AC 600W:Max 8A DC 1000W:Max 30A |
Maximum power consumption | 231W |
Minimum power consumption | 97W |
Operating temperature | • 0–1800 m altitude: -5°C to 45°C • 1800–5000 m altitude: The operating temperature reduces by 1°C every time the altitude increases by 220 m. |
Storage temperature | -40-70℃ |
Operating altitude | 5000 m |
Noise (sound pressure at normal temperature) | 65dB(A) |
Surge protection specification
| AC power interface: differential mode: ±6kV: common mode: ±6kV DC power interface: differential mode: ±2kV: common mode: ±4kV |
Power supply type | 600W AC Power 1000W DC Power |
Relative humidity | 5% to 95% (non-condensing) |
Fans | 4, Fan modules are pluggable |
Heat dissipation | Heat dissipation with fan, intelligent fan speed adjustment |
MAC | Up to 384K MAC address entries IEEE 802.1d standards compliance MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
VLAN | 4K VLANs Guest VLANs and voice VLANs GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping |
ARP | Static ARP Dynamic ARP |
IP routing | Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy Up to 256K FIBv4 entries Up to 80K FIBv6 entries |
Interoperability | VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP |
Wireless service | AP access control, AP domain management, and AP configuration template management Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis |
Ethernet loop protection
| RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection |
MPLS | MPLS L3VPN MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS |
IPv6 features | Neighbor Discover (ND) PMTU IPv6 Ping, IPv6 Tracert, IPv6 Telnet ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast Listener Discovery snooping (MLDv1/v2) IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN |
Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP Multicast VPN |
QoS/ACL | Rate limiting in the inbound and outbound directions of a port Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port DRR, SP, and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP source/destination port number, protocol type, and VLAN ID Queue-based rate limiting and shaping on ports |
Security | Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MAC Forced Forwarding (MFF) Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1X authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU protection Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets IPSec for management packet encryption ECA Deception |
Reliability | LACP E-Trunk Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static routes |
VXLAN | VXLAN functions, VXLAN L2 and L3 gateways, BGP EVPN VXLAN configuration using NETCONF/YANG |
SVF | Acting as the parent node to vertically virtualize downlink switches and APs as one device for management Two-layer client architecture ASs can be independently configured. Services not supported by templates can be configured on the parent node. Third-party devices allowed between SVF parent and clients |
iPCA | Marking service packets to obtain the packet loss ratio and number of lost packets in real time Measurement of the number of lost packets and packet loss ratio on networks and devices |
Management and maintenance
| Cloud-based management Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different severities GVRP MUX VLAN NetStream Telemetry |
Official reference: Huawei CloudEngine S6730-H Series 10GE Switches brochure. Source match: official exact model series reference.
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |
Huawei CloudEngine S6730-H24X6C 24-Port 10GE Switch is a HUAWEI S6700 Series Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For S6730-H24X6C, the manufacturer specification lists fixed downlink ports as 24 x 10GE SFP+.
For S6730-H24X6C, the manufacturer specification lists dimensions (w x d x h) as 442 mm x 420 mm x 43.6 mm.
For S6730-H24X6C, the manufacturer specification lists input voltage as • AC Power - Rated AC voltage: 100V to 240V AC; 50/60 Hz - Max. AC voltage: 90V to 290V AC; 45–65 Hz • DC Power - Rated DC voltage: –48V~–60V - Max. DC voltage:-38.4V DC~-72V DC.
S6730-H24X6C is in stock at YYST Global. Contact the sales team to confirm the required quantity, exact configuration, delivery destination and current lead time before ordering.
MODEL-SPECIFIC PROCUREMENT RESOURCE
Compare Huawei CloudEngine S6730-H24X6C and S6730-H48X6C switches by 10GE access density, QSFP28 uplink behavior, exact part-number checks and deployment boundaries.
Compare S6730-H access density, part number and QSFP28 mode boundariesRelated products

Huawei S6730-H48X6C is a 1U CloudEngine S6730-H switch with 48 fixed 10GE SFP+ ports and six 40/100GE QSFP28 ports for high-density aggregation and campus convergence.

Huawei S6730-S24X6Q is a 1U CloudEngine S6730-S switch with 24 fixed 10GE SFP+ ports and six 40GE QSFP+ uplinks that can follow Huawei's licensed 100GE upgrade path.

S6720-30C-EI-24S-AC is listed in Huawei S6700 Series Switches. Check model compatibility, current stock, condition and quotation details.

S6720S-26Q-EI-24S-AC is listed in Huawei S6700 Series Switches. Check model compatibility, current stock, condition and quotation details.