AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point
- 763 412 7282
- +86 010 69614620
AP2051DN-E Overview
AP2051DN-E is a HUAWEI wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point. Category: Huawei AP2000 Series Access Points. Condition: New Factory Sealed.
AP2051DN-E Specification
| PoE port protection | PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion |
| Ingress protection level | IP20 |
| Atmospheric pressure | 53~106Kpa ETSI 300 019-2-3 |
| Ground/Floating ground | Floating ground |
| Altitude | The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m. |
| Temperature range | Operating temperature: 0~40℃ Storage temperature: -40~70℃ |
| Humidity range | 5%~95% |
| CE certification | CE(Rohs, Reach, WEEE) |
| Wi-Fi Alliance | Supported |
| Certificate in China | CMIIT ID;CCC;/Certified by the Radio Regulatory Commission/Network Access License of the Ministry of Industry and Information Technology |
| Other certifications (IC/C-Tick) | RCM; BT |
| Safety regulation | EN 60950-1 |
| Environmental protection | RoHS |
| MIMO | 2x2:2Multiple-input multiple-output (MIMO). For example, 4x4:4 indicates 4SU and 4MU. |
| Wi-Fi standard | 802.11b/g/n 802.11a/n/ac/ac wave2 |
| Antenna gain | 2.4G:3dB 5G:4dB(for claim) |
| Radio power (maximum) | 2.4G: 23dBm(Max) 5G: 23dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 20dBm/chain(Max) 5G : 20dBm/chain)(Max) |
| RF ports and built-in antennas | Built-in smart antenna, Dual bands, 2x2 MIMO |
| Device power consumption | 11.5 W (not including USB or PoE out)14.5 W (including USB of 2.5 W) |
| Ethernet interface | 7xRJ45: 1) In-wall: 1xGE (RJ45, PoE In, 10M/100M/1000M auto, b.1x Pass-Through(RJ45)); 2) outside wall: 4xGE (RJ45, 10M/100M/1000M auto with a port PoE out); b.1x Pass-Through(RJ45) |
| Weight (kg) | 0.25kg |
| Dimensions (H x W x D, in mm) | 86*150*32.5 (note: without hump on the backside) |
| LED indicator | One two-color LED indicator |
| Preferential Selection of Power Supply (DC Input/PoE Input When Both Power Supply Modes Exist) | No priorityNote: 1) Hot backup is not supported between DC and PoE inputs. 2) When the two power supply modes coexist, the DC input range must be 12 V±5%. 1. Differentiate priorities and connect to the power supply with a higher priority. 2. The input source with a higher voltage is used as the main power supply regardless of the priority. Both the input source and the input source may supply power due to the voltage difference of the power adapter, the output voltage difference of the switch, the length of the network cable, and the impedance of the network cable. 3. Hot backup is supported. The system does not restart when one of them is removed. 4. Hot backup is not supported. If one of them is removed, the device may restart. |
| DC input | 45.6V-57V |
| Power supply (input) for PoE out | The PoE out has the same input with the system Power (PoE_IN or 48V DC power supply) |
| PoE input | 802.3af/at (only supported by in-wall GE0 port) |
| Exact product model | AP2051DN-E |
| Product family | Huawei AirEngine/AP wireless access point |
| Official Huawei documentation | Huawei Enterprise Support results for AP2051DN-E |
AP2051DN-E Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
AP2051DN-E FAQ
What is AP2051DN-E?
AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point is a HUAWEI AP2000 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What interfaces and ports does AP2051DN-E provide?
For AP2051DN-E, the manufacturer specification lists poe port protection as PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion.
What is the temperature range of AP2051DN-E?
For AP2051DN-E, the manufacturer specification lists temperature range as Operating temperature: 0~40℃ Storage temperature: -40~70℃.
What is the humidity range of AP2051DN-E?
For AP2051DN-E, the manufacturer specification lists humidity range as 5%~95%.
Is AP2051DN-E available from YYST Global?
Contact YYST Global to confirm availability for AP2051DN-E, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related AP2051DN-E
AP2051DN-S Huawei AP2000 Dual-band 802.11ac Wave 2 Wall-plate Access Point
Huawei AP2051DN-S is an AP2000 wall-plate Wi-Fi 5 access point with five Gigabit data ports, separate telephone pass-through connectors and USB. Verify the regional version, wall-box clearance and power budget.
Huawei AP2051DN-L-S Wireless Access Point
AP2051DN-L-S belongs to Huawei AP2000, not AirEngine 5700. Huawei documents its GE interface in root mode and Ethernet interface in endpoint mode, and states that these wired-interface working modes cannot be changed.
Huawei AP2050DN-S Wall-Plate Access Point
Huawei AP2050DN-S is an indoor wall-plate access point with an IEEE 802.11ac Wave 2 wireless module. The exact manufacturer ordering line lists mainframe part number 50083061 with dual-frequency 2×2 radio and a built-in antenna. GE0/PoE_IN supplies the Gigabit Ethernet uplink and PoE input, while GE1–GE4 are Gigabit data ports. The AP also provides USB2.0 storage and an RJ45 network/phone cable pass-through. Power choices are 48 V ±5% DC or IEEE 802.3af/at PoE; the 11.5 W reference excludes USB output power. Huawei states that the power adapter is purchased separately. The image shown is the original manufacturer interface illustration.
AP2050DN-E Huawei AP2000 Series 802.11ac 2x2 MU-MIMO Access Point
AP2050DN-E HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.
Huawei AP2030DN Wall-Plate Access Point
Huawei AP2030DN is an enterprise wall-plate access point with a manufacturer ordering reference of 50082640. That exact row specifies five RJ45 connections, two RJ11 connections and an 802.11ac dual-frequency design. The interface table separates a Gigabit GE/PoE uplink from four 10/100M ETH0–ETH3 room ports and identifies telephone interfaces for PSTN and for a POTS phone or modem. Power options are 12 V ±10% DC and IEEE 802.3af/at PoE, with an 8.7 W consumption reference. The illustrated top, bottom and side views are original manufacturer interface artwork. AP2030DN-S is a different order reference and has a simpler wired layout.
Huawei AP2030DN-S Wall-Plate Access Point
Huawei AP2030DN-S is an indoor 86-type wall-plate access point. Its exact manufacturer mainframe ordering line is part number 50083605, described as 802.11ac, dual-band 2×2 with a built-in antenna. The hardware guide documents one 10/100M ETH/PoE connection to the central AP, IEEE 802.3af input and a 5.1 W consumption reference. Cabling must be Cat5e or better and no longer than 100 m. The reference enclosure is 26 × 86 × 120 mm and 0.1 kg. The displayed image is a shared manufacturer wall-plate interface illustration supplied in the AP2030DN-S chapter, not a photograph of the offered unit.