FORTINET FN-CABLE-SFP28-5 Transceiver Modules
- 763 412 7282
- +86 010 69614620
FN-CABLE-SFP28-5 Buying Guide
Fortinet FN-CABLE-SFP28-5 SFP28 Cable is listed by YYST Global for buyers looking for FORTINET Transceiver Modules. FN-CABLE-SFP28-5 is Fortinet's five-metre 25G SFP28 DAC: passive twinax copper with included cable-end transceivers, 5 m length and 35 mm minimum bend radius. The listed condition is New Factory Sealed. The reference price is US$ 149.00. Contact our sales team to validate compatibility, scope, fulfillment and lead time before ordering.
- Model: FN-CABLE-SFP28-5
- Brand: FORTINET
- Category: Fortinet Transceiver Modules
- Condition: New Factory Sealed
- Reference price: US$ 149.00
FN-CABLE-SFP28-5 Overview
five-metre 25G SFP28 DAC
FN-CABLE-SFP28-5 is the exact Fortinet passive direct-attach cable order for 25 Gbps / 25GBase-CR. Its fixed assembly uses SFP28 at both ends, measures 5 m and includes the cable-end transceivers.
Deployment decision
Check tray congestion and a continuous 35 mm bend radius across the five-metre run; replace the design rather than over-bending the cable.
Physical acceptance
Inspect both ends, latch condition, cable jacket and the full route. Maintain at least a 35 mm bend radius, keep strain away from the cages and record both connected device models, port numbers and software releases.
Link acceptance
Prove the configured Ethernet rate, link state, error counters and traffic in both directions. Passive copper length and connector form are fixed; do not substitute an optical assembly, a different form factor or a different length under the same line item.
Official evidence: Fortinet Transceivers and Cables data sheet.
FN-CABLE-SFP28-5 Specification
| Exact model / SKU | FN-CABLE-SFP28-5 |
| Exact Fortinet SKU | FN-CABLE-SFP28-5 |
| Procurement identity | five-metre 25G SFP28 DAC |
| Protocol / rate | 25 Gbps / 25GBase-CR |
| Cable ends | SFP28 at both ends |
| Length | 5 m |
| Cable type | Passive twinax copper |
| Cable-end transceivers | Included |
| Minimum bend radius | 35 mm |
| Operating temperature | -40 to 85 degrees C |
| Acceptance action | Check tray congestion and a continuous 35 mm bend radius across the five-metre run; replace the design rather than over-bending the cable. |
| Source match | FN-CABLE-SFP28-5: exact official Fortinet ordering row; 25 Gbps / 25GBase-CR, SFP28 at both ends, 5 m, 35 mm bend radius |
| Official manufacturer reference | Fortinet Transceivers and Cables official data sheet |
FN-CABLE-SFP28-5 Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Document/Firmware Download
FN-CABLE-SFP28-5 FAQ
What is FN-CABLE-SFP28-5 used for?
Fortinet FN-CABLE-SFP28-5 SFP28 Cable is a FORTINET accessory or component in the Transceiver Modules category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with FN-CABLE-SFP28-5?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with FN-CABLE-SFP28-5?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of FN-CABLE-SFP28-5?
The current reference price for FN-CABLE-SFP28-5 is US$ 149.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related FN-CABLE-SFP28-5
Fortinet FN-CABLE-SFP28-3 SFP28 Cable
FN-CABLE-SFP28-3 is Fortinet's three-metre 25G SFP28 DAC: passive twinax copper with included cable-end transceivers, 3 m length and 35 mm minimum bend radius.
Fortinet FN-CABLE-SFP28-1 SFP28 Cable
FN-CABLE-SFP28-1 is Fortinet's one-metre 25G SFP28 DAC: passive twinax copper with included cable-end transceivers, 1 m length and 35 mm minimum bend radius.
Fortinet FN-CABLE-SFP28-A-4PACK SFP28 Cable
FN-CABLE-SFP28-A-4PACK is a Fortinet SFP28 cable orderable item. The available official source is the related Fortinet transceiver series document. Confirm endpoint compatibility and the exact model before purchase.
Fortinet FN-CABLE-SFP56-DAC-LB5 SFP56 Cable
FN-CABLE-SFP56-DAC-LB5: 2.5-metre 50G serviceable copper run; exact passive copper length, form factor and bend requirement verified in Fortinet's official table.
Fortinet FN-CABLE-SFP56-DAC-L1 SFP56 Cable
FN-CABLE-SFP56-DAC-L1: One-metre 50G top-of-rack link; exact passive copper length, form factor and bend requirement verified in Fortinet's official table.
Fortinet FN-CABLE-QSFP56-DAC-LB5 QSFP56 Cable
FN-CABLE-QSFP56-DAC-LB5: 2.5-metre 200G cross-rack route; exact passive copper length, form factor and bend requirement verified in Fortinet's official table.
Fortinet FN-CABLE-QSFP56-DAC-L1 QSFP56 Cable
FN-CABLE-QSFP56-DAC-L1: One-metre 200G adjacency link; exact passive copper length, form factor and bend requirement verified in Fortinet's official table.
Fortinet FN-CABLE-QSFP28-5 QSFP28 Cable
FN-CABLE-QSFP28-5 is Fortinet's five-metre 100G passive copper link: passive twinax copper with included cable-end transceivers, 5 m length and 25 mm minimum bend radius.
ISO 9001 · ISO 14001 · ISO 45001
ISO 20000 · ISO 27001 · D&B