FN-CABLE-SFP+1 Fortinet 1 m 10 GE Passive SFP+ DAC
- 763 412 7282
- +86 010 69614620
FN-CABLE-SFP+1 Overview
FN-CABLE-SFP+1 short-link identity
FN-CABLE-SFP+1 is the one-metre Fortinet 10 GE passive twinax direct-attach cable. Both SFP+ ends are included, so it is a complete copper cable assembly rather than two loose optical transceivers.
Same-rack use case
The 1 m order is suited to a measured short path where excess cable would obstruct airflow or service access. Measure the routed distance between cages, not the straight-line gap, and include strain relief without forcing the cable below its documented 22 mm bend radius.
Endpoint acceptance
Both devices must have supported SFP or SFP+ slots operating at the required 10 GE mode. Verify the exact Fortinet platform and software support before purchase; physical cage fit alone is not compatibility evidence.
Receiving check
Confirm FN-CABLE-SFP+1, the 1 m marking, two attached ends and undamaged connector latches. The official data sheet lists a 4.5 mm cable diameter, 0°C to 70°C operation, hot-plug support, RoHS compliance and digital monitoring.
Official source: Fortinet Transceivers data sheet.
FN-CABLE-SFP+1 Specification
| Exact model / SKU | FN-CABLE-SFP+1 |
| Exact cable SKU | FN-CABLE-SFP+1 |
| Link application | Short measured equipment connection |
| Cable length | 1 m |
| Protocol | 10GBase-CR / 10 GE |
| Assembly | Passive twinax copper with both SFP+ ends included |
| Minimum documented bend radius | 22 mm |
| Cable diameter | 4.5 mm |
| Power dissipation | Less than 0.1 W |
| Environment | 0°C to 70°C |
| Operational properties | Hot plug, digital monitoring and RoHS |
| Source match | FN-CABLE-SFP+1: exact Fortinet ordering-table match for a 1 m 10 GE passive SFP+ DAC; 22 mm bend radius and 4.5 mm diameter |
| Official manufacturer reference | Fortinet Transceivers data sheet |
FN-CABLE-SFP+1 Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Document/Firmware Download
FN-CABLE-SFP+1 FAQ
What is FN-CABLE-SFP+1 used for?
FN-CABLE-SFP+1 Fortinet 1 m 10 GE Passive SFP+ DAC is a FORTINET accessory or component in the Transceiver Modules category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with FN-CABLE-SFP+1?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with FN-CABLE-SFP+1?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of FN-CABLE-SFP+1?
The current reference price for FN-CABLE-SFP+1 is US$ 45.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related FN-CABLE-SFP+1
FN-CABLE-SFP+5 Fortinet 5 m 10 GE Passive SFP+ DAC
FN-CABLE-SFP+5 is the 5 m Fortinet passive 10 GE SFP+ direct-attach cable, with a larger cable body and bend requirement than the shorter variants.
FN-CABLE-SFP+3 Fortinet 3 m 10 GE Passive SFP+ DAC
FN-CABLE-SFP+3 is Fortinet's 3 m 10GBase-CR passive SFP+ DAC for a routed nearby-rack or appliance link.
Fortinet FN-CABLE-SFP56-DAC-LB5 SFP56 Cable
FN-CABLE-SFP56-DAC-LB5 is a 50 GE SFP56 passive direct-attach copper cable. SFP56 to SFP56 straight DAC; 2.5 m. Verify the exact host ports and deployment conditions before purchase.
Fortinet FN-CABLE-SFP56-DAC-L1 SFP56 Cable
FN-CABLE-SFP56-DAC-L1 is a 50 GE SFP56 passive direct-attach copper cable. SFP56 to SFP56 straight DAC; 1 m. Verify the exact host ports and deployment conditions before purchase.
Fortinet FN-CABLE-SFP28-5 SFP28 Cable
FN-CABLE-SFP28-5 is a 25 GE SFP28 passive direct-attach copper cable. SFP28 to SFP28 straight DAC; 5 m. Verify the exact host ports and deployment conditions before purchase.
Fortinet FN-CABLE-QSFPDD-DAC-01 QSFP-DD Cable
FN-CABLE-QSFPDD-DAC-01 is Fortinet's 1 m 400 GE QSFP-DD passive direct-attach cable. Match the full SKU, interface geometry, media and endpoint support before purchase.
Fortinet FN-CABLE-QSFPDD-8SFP56-LB5 QSFP-DD Cable
FN-CABLE-QSFPDD-8SFP56-LB5 is Fortinet's 2.5 m 400 GE to eight 50 GE breakout cable. Match the full SKU, interface geometry, media and endpoint support before purchase.
Fortinet FN-CABLE-QSFPDD-8SFP56-L1 QSFP-DD Cable
FN-CABLE-QSFPDD-8SFP56-L1 is Fortinet's 1 m 400 GE to eight 50 GE breakout cable. Match the full SKU, interface geometry, media and endpoint support before purchase.
ISO 9001 · ISO 14001 · ISO 45001
ISO 20000 · ISO 27001 · D&B