IE-2000-16PTC-G-E - Cisco Industrial Ethernet 2000 Series Switch

IE-2000-16PTC-G-E exact hardware and software boundary

IE-2000-16PTC-G-E is a Cisco Industrial Ethernet 2000 Series switch with 16 10/100 copper ports including four PoE+ ports, plus two Gigabit uplinks. Cisco orders this exact PID with the LAN Base software tier. The port media and license suffix are procurement facts, not interchangeable marketing labels.

Feature entitlement

IEEE 1588 timing is listed for this exact order profile. L2NAT status: Available through the documented software-license upgrade path. This PTC model includes four PoE+ access ports; validate the actual powered-device load and cabinet power design. This exact suffix is not the conformal-coated X or NX order.

Model-specific purchase decision

This E profile supplies PoE+ and IEEE 1588 but does not itself establish an L2NAT entitlement. The quote and running license must be checked before a translated machine network is promised, and the migration review must account for the successor's lower access-port count.

Primary dossier: Optical bill of materials

For this order, treat the following as the lead acceptance record rather than a generic checklist. Where SFP interfaces are present, bind the exact transceiver, wavelength, fiber type, connector path and optical budget to the port. A generic SFP description is insufficient for an industrial fiber acceptance record. Link the completed evidence to IE-2000-16PTC-G-E, its serial number and the authorized purchase line.

The optical schedule should distinguish access fibers from uplink fibers and associate each strand with patch panels, distance, approved transceiver and measured receive level. Record cleaning and polarity checks at commissioning. Where a successor changes port type or density, retain the schedule as the source for transceiver reuse and fiber-remediation decisions.

Secondary control: Configuration rollback

This is the second product-specific release control for the order. Save the accepted running configuration and the previous network state, then define a rollback trigger that can be measured. Recovery evidence should cover addressing, uplinks and endpoint reachability rather than boot success alone. Reconcile the result with the exact port configuration and software tier stated above before handover.

Operational proof: Maintenance-window controls

Define installer, outage boundary, acceptance checkpoints and rollback owner. Close the change only after endpoints, upstream redundancy, monitoring and the saved configuration have all been reconciled. Preserve the result as a dated part of this model's acceptance file rather than reusing evidence from another IE 2000 variant.

Published lifecycle

Cisco lists 26 July 2024 as the last order date, 26 July 2025 as the end of software maintenance, 26 July 2027 as the end of vulnerability and security support, and 31 July 2029 as the last support date for the affected IE 2000 products. The migration reference for this line is IE-3200-8P2S-E; validate the complete replacement design rather than assuming equivalence.

Related IE 2000 order records

• IE-2000-16TC-G-X - compare port media, software tier and industrial feature boundary.
• IE-2000-16TC-G-E - compare port media, software tier and industrial feature boundary.
• IE-2000-16TC-B - compare port media, software tier and industrial feature boundary.

Official evidence: Cisco IE 2000 Series data sheet; Cisco IE 2000 lifecycle bulletin; and Cisco IE 2000 support page.