AIRAP1852E-BK910C Cisco Aironet 1852e Indoor 1.733Gbps Thoughput AP

AIR-AP1852E-BK910C exact order identity

AIR-AP1852E-BK910C is a 1852e indoor access point for separately purchased external antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token B with a configurable K910C ten-access-point pack. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco states that external antennas are sold separately and certifies the platform for antenna gains up to 6 dBi at both 2.4 and 5 GHz. Record the approved Cisco antenna part numbers, four radio paths, gain, pattern, cable loss, connectors and mounting orientation. A compatible connector alone is not regulatory or RF-design evidence.

Order and controller boundary

K910C combines a configurable order with ten physical access points. Domain selection and physical quantity are independent acceptance gates. Preserve the configured-domain evidence at carton level and create ten serial-level rows. Quarantine partial, mixed-domain or unconfigured receipts.

B regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. The B plan contains a broad middle 5 GHz range followed by a separate upper block. Capacity planning should identify which radios use each block and should not copy a narrower domain's channel template. Retain a controller export showing the enabled lower, middle and upper channel sets. Compare the installed country setting, dynamic channel assignment and survey plan before accepting the site.

Procurement inference: the comparatively broad middle range and separate upper range can influence how capacity is distributed across radios. Preserve the survey's planned channel groups and compare them with the controller's dynamic assignment after a representative operating period. If the destination authorization narrows the available set, update the capacity calculation and acceptance record rather than leaving a B-profile assumption in the design.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For this 1852 order, include the AireOS or Catalyst 9800 release actually used and note whether the unit is controller-managed or operating in an approved Mobility Express role.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. The 1852 draws up to 20.9 W; 802.3af also disables AUX Ethernet and USB, while the external-antenna 1852e reduces its 2.4 GHz radio from 3x4 to 2x3.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco explicitly makes the customer responsible for country approval; retain the lookup alongside the 1852's controller country and enabled-channel evidence.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A K9, K9C, K910, K910C, antenna-form or regulatory-token change is a different 1852 procurement line and must not be accepted as a cosmetic substitution.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet generation must leave service and which surrounding dependencies need migration. Cisco ended 1850 Series software maintenance in 2023, so controller compatibility evidence is especially important for inventory purchased late in the lifecycle.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. A spare 1852 must be checked against the protected controller release, certificate behavior, regulatory domain, antenna form and 2027 support cutoff before assignment.

Monitoring handover

Assign owners for AP reachability, controller join failures, radio utilization, client health and switch-port errors. Confirm that the exact serial appears in inventory and monitoring, then test the alert path. Record dashboard object, notification route and escalation owner. Telemetry that is not tied to an owned asset does not provide a reliable service baseline and will not support later comparison after channel or software changes. Monitoring should identify the 1852 serial, controller object, both Ethernet interfaces, radio health and the team responsible for end-of-support migration.

Change-window controls

Document staging evidence, production window, installer, rollback owner and measurable success criteria. Preserve the prior controller or AP state needed for recovery. After the change, close temporary credentials, compare authentication, monitoring and RF results with the approved baseline, and record the final decision. The work is not complete merely because the unit powers on or appears in a controller list. Rollback must account for controller image alignment, country configuration and any Mobility Express primary role, not only the physical swap.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852I-BK910 - compare antenna form and domain evidence.
• AIR-AP1852I-B-K9C - compare antenna form and domain evidence.
• AIR-AP1852E-B-K9C - compare order form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.