AIR-AP1852I-B-K9C Cisco Aironet 1852i Enterprise-class Access Point

AIR-AP1852I-B-K9C exact order identity

AIR-AP1852I-B-K9C is a 1852i indoor access point with integrated omnidirectional antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token B with a single-unit configurable K9C order. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco rates the internal antenna system at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz, with 360-degree horizontal beamwidth. No external antenna is selected by this SKU. Preserve enclosure orientation, bracket, mounting height and post-install coverage because placement determines how the integrated pattern is used.

Order and controller boundary

Cisco lists K9C as a configurable controller-based order, and its lifecycle table describes affected K9C lines as Mobility Express products. Retain the final domain and software role on the quotation and received unit. Prove the intended controller or Mobility Express state instead of inferring it from the suffix alone.

B regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-11; 5 GHz blocks at 5.180-5.320, 5.500-5.720, and 5.745-5.825 GHz. The B plan contains a broad middle 5 GHz range followed by a separate upper block. Capacity planning should identify which radios use each block and should not copy a narrower domain's channel template. Retain a controller export showing the enabled lower, middle and upper channel sets. Compare the installed country setting, dynamic channel assignment and survey plan before accepting the site.

Procurement inference: the comparatively broad middle range and separate upper range can influence how capacity is distributed across radios. Preserve the survey's planned channel groups and compare them with the controller's dynamic assignment after a representative operating period. If the destination authorization narrows the available set, update the capacity calculation and acceptance record rather than leaving a B-profile assumption in the design.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. Relate the survey result to the 1852's 4x4:4 single-user and 4x4:3 multiuser 5 GHz design rather than treating the published 1.7 Gbps PHY rate as measured site throughput.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. If the product came from a ten-unit pack, the 1852 carton identity must be expanded into ten individual records before support, return or replacement handling.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet generation must leave service and which surrounding dependencies need migration. Cisco ended 1850 Series software maintenance in 2023, so controller compatibility evidence is especially important for inventory purchased late in the lifecycle.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Test the complete user path after the 1852 joins; the controller relationship alone does not prove client authentication, DHCP, DNS or application reachability.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. When replacing a neighboring legacy AP, preserve roaming evidence in both directions and compare it with the 1852's installed radio and channel state.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record the security behavior verified on the deployed controller release; do not turn a family data-sheet capability into an unconditional software claim.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation. Use controller, switch and client timestamps to separate a PoE/AUX limitation, CAPWAP issue, RF condition and authentication failure before declaring a hardware defect.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. The final handover should include the exact PID, regulatory approval, serial, antenna or mounting record, power mode, both Ethernet interfaces and lifecycle owner.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852E-BK910C - compare antenna form and domain evidence.
• AIR-AP1852E-B-K9 - compare antenna form and domain evidence.
• AIR-AP1852E-B-K9C - compare antenna form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.