CISCO AIR-AP4800-S-K9C Aironet 4800 Series Access Points

AIR-AP4800-S-K9C Order Identity

AIR-AP4800-S-K9C is a Cisco Aironet 4800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 4800 internal-antenna access point, carries regulatory-domain token S, and uses a configurable single-unit order.

Antenna and quantity boundary

Integrated multiradio antenna system; no external Wi-Fi antenna is selected as part of this SKU. Confirm mounting orientation, ceiling structure, Hyperlocation requirements and RF survey assumptions because the antenna system is integral to the platform.

This K9 order form represents one access point; antennas, mounting choices, power source and controller dependencies remain separate unless the authorized bill of materials states otherwise.

The C suffix marks a configurable order form. The final Cisco quotation must preserve the selected regulatory domain and any configuration choices; the suffix does not make the unit globally deployable.

Regulatory-domain control

The order carries regulatory-domain token S. Treat that token as an identifier, not a country name. Complete site address validation and Cisco compliance lookup against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token S.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

RF survey

Associate this order with the survey location, channel plan and expected client density. Re-survey after installation if mounting or antenna conditions differ from design. The survey record should show mounting height, obstructions, neighboring radios, channel width and the client mix used for capacity planning. Compare measured post-install coverage with the design and document any power, channel or placement adjustment. This gives the exact order a site-specific purpose beyond a generic product description.

Mounting inventory

List the ceiling or wall bracket, enclosure, safety restraint and access requirements. Receiving should reject a mechanically incomplete deployment kit. Receiving should identify the bracket and any above-ceiling, wall, enclosure or seismic requirement before scheduling installers. Photograph the mounting label and cable entry after installation, and record access constraints for replacement. Missing mechanical parts should be resolved as a bill-of-material exception, not hidden in the AP description.

Spare policy

State whether the unit is production capacity, a cold spare or a replacement. Define firmware, storage, periodic test and ownership requirements for unused stock. A spare should have a named site scope, compatible controller image, storage condition and periodic power-on test. Record whether its regulatory domain, antenna form and mounting kit match the protected population. Before use, repeat compliance and software checks because suitability can change while the unit is held in stock.

Site acceptance

Commission association, authentication, roaming, uplink negotiation and monitoring at the intended location. Preserve results that can be compared after later changes. The handover record should contain client authentication, DHCP and DNS checks, roaming evidence, controller alarms, switch-port counters and a monitoring owner. Test from representative client types in the intended coverage area. Acceptance is incomplete when the AP merely joins the controller but user and operational paths remain unverified.

Security baseline

Record the approved controller policy, management access, certificate handling and authentication test. Do not infer current security support from the hardware name alone. Retain the controller policy name, management authorization, certificate or trust workflow, authentication test and logging destination used at commissioning. Confirm the supported security behavior on the deployed software release. The hardware family alone must not be used to promise a feature or protocol that has not been validated.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Cisco Aironet 4800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 4800 internal-antenna access point records

• AIR-AP4800-R-K9
• AIR-AP4800-E1-K9C
• AIR-AP4800-B1-K9C

Official evidence: Cisco Aironet 4800 Series data sheet, Cisco Aironet 4800 Series getting started guide, and Cisco end-of-life notices.