AIR-AP4800-D-K9C - Cisco Aironet 4800 Access Point

AIR-AP4800-D-K9C Order Identity

AIR-AP4800-D-K9C is a Cisco Aironet 4800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 4800 internal-antenna access point, carries regulatory-domain token D, and uses a configurable single-unit order.

Antenna and quantity boundary

Integrated multiradio antenna system; no external Wi-Fi antenna is selected as part of this SKU. Confirm mounting orientation, ceiling structure, Hyperlocation requirements and RF survey assumptions because the antenna system is integral to the platform.

This K9 order form represents one access point; antennas, mounting choices, power source and controller dependencies remain separate unless the authorized bill of materials states otherwise.

The C suffix marks a configurable order form. The final Cisco quotation must preserve the selected regulatory domain and any configuration choices; the suffix does not make the unit globally deployable.

Regulatory-domain control

The order carries regulatory-domain token D. Treat that token as an identifier, not a country name. Complete sales-destination evidence and local radio authorization against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token D.

Controller readiness

Record the intended Cisco wireless controller, supported software train and join method. Validate the AP on a staging network before changing the production RF plan. The acceptance file should identify the controller address, discovery path, AP authorization method and the release evidence used for approval. Capture the first successful join, configuration download and radio state, then remove any temporary staging authorization. This makes a later controller migration traceable without claiming that every software release supports the hardware.

Serial registration

Capture each serial number against the site, controller and asset owner. For multi-unit orders, reconcile every chassis rather than recording only the carton SKU. For each received unit, preserve the carton reference, chassis serial, MAC address, deployment site and controller assignment. A ten-unit pack needs ten reconciled asset rows and exception handling for shortages or substitutions. This control prevents a pack-level SKU from obscuring which physical AP is covered by support or replacement work.

Replacement planning

Cisco lists the 3800 Series in its end-of-life notices. Record the permitted service horizon, replacement trigger and successor design with this purchase. Document the event that ends further 3802 deployment, the approved successor family and any controller coexistence constraint. Include funding, survey impact and installation sequencing. If the item is purchased as a spare, set a final-use date so old inventory does not silently outlive the network's supported architecture.

Order reconciliation

Match the exact regulatory-domain token, antenna form, configurable suffix and unit quantity on the Cisco quotation before accepting a substitute. The purchase review should compare every meaningful token in the quoted model with the requested line and this page. Record whether the order is single or ten-unit, internal or external antenna, configurable or fixed-domain. Any substitution requires a new regulatory, antenna, quantity and lifecycle review before acceptance.

Monitoring ownership

Assign owners for controller alarms, switch-port health, radio utilization and software advisories so the installed AP remains observable after handover. Monitoring handover should name the team that owns AP reachability, controller join failures, radio utilization, client health and switch-port errors. Define alert thresholds and an escalation path, then verify that the exact serial appears in the operational inventory. Unowned telemetry does not provide a reliable service baseline.

Change control

Define the staging date, installation window, rollback owner and validation threshold before the AP is joined to a production controller. The change record should list staging evidence, production window, responsible installer, rollback decision and success criteria. Preserve the previous controller or AP state needed for recovery. After the window, close temporary credentials and compare monitoring, authentication and RF results with the approved baseline before declaring completion.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Cisco Aironet 4800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 4800 internal-antenna access point records

• AIR-AP4800-Q-K9C
• AIR-AP4800-K-K9C
• AIR-AP4800-I-K9C

Official evidence: Cisco Aironet 4800 Series data sheet, Cisco Aironet 4800 Series getting started guide, and Cisco end-of-life notices.