AIR-AP3802E-SK910C Cisco Aironet 3800e Indoor Dual-band AP 10-Pack

AIR-AP3802E-SK910C exact order identity

AIR-AP3802E-SK910C is a controller-based Cisco Aironet 3800 Series 802.11ac Wave 2 access-point order. The PID selects the 3802E access point for external antennas, configurable ten-unit K910C eco-pack and regulatory token S.

Antenna architecture

The 3802E requires separately selected compatible external antennas; connector fit alone is not an approved RF design. Record antenna PID, connector use, gain, pattern, cable loss, mounting, grounding and country approval.

Quantity and configuration boundary

Cisco identifies K910C as a configurable ten-access-point eco-pack. Preserve the selected regulatory-domain evidence and reconcile ten physical units independently.

S regulatory evidence

The domain token is not a country name. Compare the complete S-domain PID on quotation, carton and asset record; family equivalence is not regulatory equivalence.

Make quotation accuracy the S-domain control. The approved quote, supplier confirmation, received carton and asset record must carry the complete same PID. A substitution request should identify antenna form, controller-image state and regulatory token separately. Only after destination approval and controller review should the replacement line be accepted, even if pricing and lead time are unchanged.

Controller, PoE and uplink boundary

Validate the exact controller release and CAPWAP join before deployment. Preserve negotiated PoE, multigigabit Ethernet rate, cable certification and error counters; family capability does not prove the installed switch and cable path achieve that rate.

Lifecycle and migration decision

Cisco lists 2022-10-31 as end of sale and 2027-10-31 as last support for the Aironet 3800 Series, with Catalyst 9130AX as the replacement direction. Available inventory does not extend those dates.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For this 3802 order, retain controller discovery, image transfer and final CAPWAP join by serial.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. Record negotiated PoE state after radios and production features are active, not only at idle boot.

Ethernet and cabling proof

Preserve the permanent-link test, patch-lead identities, switch port, negotiated Ethernet rate and error counters. Investigate pair faults, excessive length or rate fallback before wireless acceptance begins. A link light only proves connectivity at some rate; it does not demonstrate the intended uplink performance. Tie the cable result to the AP serial so a later throughput problem can be separated from radio, controller and wired-path causes. Prove the permanent link, patch leads, multigigabit switch port, negotiated rate and error counters.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. A ten-unit order still requires ten serial, MAC, site and controller asset records.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet 3800 generation must leave service and which surrounding dependencies need migration. Apply the 2027 support limit to software, spares, entitlement and replacement planning.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. Record only security capabilities proven on the deployed controller and software release.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving must distinguish 3802E from 3802I and single-unit from ten-unit order before release.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. Handover should include PID, all serials, compliance result, controller, antenna record and lifecycle owner.

Related Aironet 3802 orders

• AIR-AP3802I-NK910C - compare antenna, quantity, configuration and domain evidence.
• AIR-AP3802I-TK910C - compare antenna, quantity, configuration and domain evidence.
• AIR-AP3802I-HK910C - compare antenna, quantity, configuration and domain evidence.

Official evidence: Cisco Aironet 3800 data sheet; Cisco getting-started guide; Cisco 3800 lifecycle bulletin; Cisco support page; and Cisco compliance lookup.