AIR-AP3802E-IK910C Cisco Aironet 3800e 802.11a/g/n/ac AP 10-Pack

AIR-AP3802E-IK910C exact order identity

AIR-AP3802E-IK910C is a controller-based Cisco Aironet 3800 Series 802.11ac Wave 2 access-point order. The PID selects the 3802E access point for external antennas, configurable ten-unit K910C eco-pack and regulatory token I.

Antenna architecture

The 3802E requires separately selected compatible external antennas; connector fit alone is not an approved RF design. Record antenna PID, connector use, gain, pattern, cable loss, mounting, grounding and country approval.

Quantity and configuration boundary

Cisco identifies K910C as a configurable ten-access-point eco-pack. Preserve the selected regulatory-domain evidence and reconcile ten physical units independently.

I regulatory evidence

The domain token is not a country name. Preserve the I-domain label in the asset record and verify that replacement stock carries the same approved regulatory identity.

Use replacement-stock readiness for the I-domain workflow. List the deployed population this unit may protect, confirm those assets use the same approved token and retain the mounting or antenna dependencies. During periodic spare testing, verify controller join and country configuration without reassigning the unit. Any cross-site use requires a fresh destination approval before installation.

Controller, PoE and uplink boundary

Validate the exact controller release and CAPWAP join before deployment. Preserve negotiated PoE, multigigabit Ethernet rate, cable certification and error counters; family capability does not prove the installed switch and cable path achieve that rate.

Lifecycle and migration decision

Cisco lists 2022-10-31 as end of sale and 2027-10-31 as last support for the Aironet 3800 Series, with Catalyst 9130AX as the replacement direction. Available inventory does not extend those dates.

Deployment evidence worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. Record negotiated PoE state after radios and production features are active, not only at idle boot.

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. Tie the post-install RF result to the exact integrated or external antenna architecture.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. Reconcile bracket, enclosure, restraint, cable entry and every external-antenna component before site work.

Serial-level asset control

Capture chassis serial, base MAC address, carton reference, deployment site, controller assignment and asset owner. Reconcile the identifiers against the purchase line before activation. Multi-unit cartons require an entry for every physical access point; a carton SKU alone cannot show which unit was installed, held as a spare or returned. This record is also needed to trace support entitlement, replacement history and monitoring ownership. A ten-unit order still requires ten serial, MAC, site and controller asset records.

Software lifecycle file

Record the controller release approved for this unit, the source used to verify support, the last tested date and the owner for software advisories. Available hardware does not prove compatibility with a current or future controller train. Review Cisco support information before every expansion or replacement. The lifecycle file should also state when this Aironet 3800 generation must leave service and which surrounding dependencies need migration. Apply the 2027 support limit to software, spares, entitlement and replacement planning.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. Document roaming path, neighboring cells, client type and controller events at each cell boundary.

Interference baseline

Preserve the pre-install and post-install noise, neighboring-radio and channel-occupancy observations for the selected location. Record any controller-driven channel change during acceptance. If the regulatory profile limits the channel choices, state how that constraint affected reuse and mitigation. This baseline gives future troubleshooting a reference point and prevents an unrelated interference change from being attributed to the hardware order. Preserve the enabled-channel export after initial join and every controller migration.

Receiving inspection

At receipt, compare model label, regulatory token, antenna form, quantity, serials and visible condition with the authorized order. Photograph labels before cartons are separated. Quarantine shortages, mixed units, damaged connectors or unapproved substitutions. Do not rely on a distributor description as evidence that the exact Cisco order arrived. Close the inspection only when every physical unit is accounted for. Receiving must distinguish 3802E from 3802I and single-unit from ten-unit order before release.

Related Aironet 3802 orders

• AIR-AP3802I-NK910C - compare antenna, quantity, configuration and domain evidence.
• AIR-AP3802I-TK910C - compare antenna, quantity, configuration and domain evidence.
• AIR-AP3802I-HK910C - compare antenna, quantity, configuration and domain evidence.

Official evidence: Cisco Aironet 3800 data sheet; Cisco getting-started guide; Cisco 3800 lifecycle bulletin; Cisco support page; and Cisco compliance lookup.