AIR-AP3802E-CK910C Cisco Aironet 3800e Indoor WiFi 5 AP 10-Pack

AIR-AP3802E-CK910C exact order identity

AIR-AP3802E-CK910C is a controller-based Cisco Aironet 3800 Series 802.11ac Wave 2 access-point order. The PID selects the 3802E access point for external antennas, configurable ten-unit K910C eco-pack and regulatory token C.

Antenna architecture

The 3802E requires separately selected compatible external antennas; connector fit alone is not an approved RF design. Record antenna PID, connector use, gain, pattern, cable loss, mounting, grounding and country approval.

Quantity and configuration boundary

Cisco identifies K910C as a configurable ten-access-point eco-pack. Preserve the selected regulatory-domain evidence and reconcile ten physical units independently.

C regulatory evidence

The domain token is not a country name. Preserve the C-domain destination approval with the exact PID, serial and controller country so a nearby domain cannot be substituted silently.

Use final receiving approval as the C-domain checkpoint. Match the authorized quotation, carton label, chassis serial, destination and controller country before release. Preserve the dated Cisco lookup with those fields. A later replacement or site transfer must create a new decision rather than inheriting the old location's approval from the asset record.

Controller, PoE and uplink boundary

Validate the exact controller release and CAPWAP join before deployment. Preserve negotiated PoE, multigigabit Ethernet rate, cable certification and error counters; family capability does not prove the installed switch and cable path achieve that rate.

Lifecycle and migration decision

Cisco lists 2022-10-31 as end of sale and 2027-10-31 as last support for the Aironet 3800 Series, with Catalyst 9130AX as the replacement direction. Available inventory does not extend those dates.

Deployment evidence worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. Record negotiated PoE state after radios and production features are active, not only at idle boot.

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. Tie the post-install RF result to the exact integrated or external antenna architecture.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Save the Cisco country lookup and controller country setting with the exact regulatory token.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 3802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A changed antenna letter, domain, quantity or configurable suffix requires a new procurement review.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. Test stored spares against controller release, PoE, domain, antenna and mounting dependencies.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Commission association, authentication, addressing, DNS and application reachability on representative clients.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Compare Catalyst 9130AX controller, power, cabling, antenna, mounting and coverage dependencies.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation. Use synchronized switch, AP and controller timestamps to isolate power, CAPWAP, RF and authentication faults.

Related Aironet 3802 orders

• AIR-AP3802I-NK910C - compare antenna, quantity, configuration and domain evidence.
• AIR-AP3802I-TK910C - compare antenna, quantity, configuration and domain evidence.
• AIR-AP3802I-HK910C - compare antenna, quantity, configuration and domain evidence.

Official evidence: Cisco Aironet 3800 data sheet; Cisco getting-started guide; Cisco 3800 lifecycle bulletin; Cisco support page; and Cisco compliance lookup.