AIR-AP1852I-EK910 Cisco Aironet 1852i Dual-band WiFi 5 Enterprise AP

AIR-AP1852I-EK910 exact order identity

AIR-AP1852I-EK910 is a 1852i indoor access point with integrated omnidirectional antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token E with a fixed-domain K910 ten-access-point pack. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco rates the internal antenna system at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz, with 360-degree horizontal beamwidth. No external antenna is selected by this SKU. Preserve enclosure orientation, bracket, mounting height and post-install coverage because placement determines how the integrated pattern is used.

Order and controller boundary

Cisco's lifecycle table identifies K910 lines as ten-access-point orders. The carton PID does not replace physical-unit control. Reconcile ten serials and MAC addresses, then assign a destination, controller, antenna or mount record and acceptance result to every unit.

E regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-13; 5 GHz blocks at 5.180-5.320 and 5.500-5.700 GHz, excluding 5.600-5.640 GHz. The E profile combines lower and middle 5 GHz operation but documents an internal exclusion in the middle block. Survey and controller evidence must show that the gap was understood. Compare the enabled channel export with the E-domain profile, paying particular attention to the excluded sub-block. Preserve the lookup date, country selection and controller result in the asset file.

Procurement inference: this profile's excluded middle sub-block creates a specific migration check. Preserve the prior controller channel template, then prove that the new or restored template does not reintroduce the excluded range. If channel capacity was calculated from a continuous middle block, correct the design assumptions and record the narrower usable plan before installation approval.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For this 1852 order, include the AireOS or Catalyst 9800 release actually used and note whether the unit is controller-managed or operating in an approved Mobility Express role.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. The 1852 draws up to 20.9 W; 802.3af also disables AUX Ethernet and USB, while the external-antenna 1852e reduces its 2.4 GHz radio from 3x4 to 2x3.

Ethernet and cabling proof

Preserve the permanent-link test, patch-lead identities, switch port, negotiated Ethernet rate and error counters. Investigate pair faults, excessive length or rate fallback before wireless acceptance begins. A link light only proves connectivity at some rate; it does not demonstrate the intended uplink performance. Tie the cable result to the AP serial so a later throughput problem can be separated from radio, controller and wired-path causes. The platform has one PoE Gigabit interface and one Gigabit AUX interface used for link aggregation, so preserve both link states and the power condition under which AUX is available.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a different access-point order merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A K9, K9C, K910, K910C, antenna-form or regulatory-token change is a different 1852 procurement line and must not be accepted as a cosmetic substitution.

Roaming acceptance

Define the neighboring access points and client types used for roaming validation. Record handoff behavior, interruption observed, authentication result and controller events along the intended movement path. Compare the outcome with the site's design target rather than declaring success from static association. Where this unit replaces an older AP, test both entry and exit from its cell so a local improvement does not hide a boundary problem. When replacing a neighboring legacy AP, preserve roaming evidence in both directions and compare it with the 1852's installed radio and channel state.

Capacity observation

Define the expected concurrent clients, application mix, airtime utilization and channel-width assumptions for this location. After commissioning, capture radio utilization, retry behavior and representative throughput during a meaningful load period. Compare the observation with the survey design and state any shortfall. A peak link rate from a data sheet is not a site capacity result and should not replace measured operating evidence. Capacity acceptance should show actual client mix, airtime and retries under the available regulatory-domain channels, not only a maximum PHY figure.

Interference baseline

Preserve the pre-install and post-install noise, neighboring-radio and channel-occupancy observations for the selected location. Record any controller-driven channel change during acceptance. If the regulatory profile limits the channel choices, state how that constraint affected reuse and mitigation. This baseline gives future troubleshooting a reference point and prevents an unrelated interference change from being attributed to the hardware order. The 1852 domain table varies materially by token, so preserve interference observations against the exact enabled-channel list rather than a generic country template.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. The final handover should include the exact PID, regulatory approval, serial, antenna or mounting record, power mode, both Ethernet interfaces and lifecycle owner.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852E-EK910C - compare antenna form and domain evidence.
• AIR-AP1852E-E-K9 - compare antenna form and domain evidence.
• AIR-AP1852I-E-K9C - compare order form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.