AIR-AP1852I-F-K9C Cisco Aironet 1852i 802.11a Wave 2 Access Point

AIR-AP1852I-F-K9C exact order identity

AIR-AP1852I-F-K9C is a 1852i indoor access point with integrated omnidirectional antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token F with a single-unit configurable K9C order. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco rates the internal antenna system at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz, with 360-degree horizontal beamwidth. No external antenna is selected by this SKU. Preserve enclosure orientation, bracket, mounting height and post-install coverage because placement determines how the integrated pattern is used.

Order and controller boundary

Cisco lists K9C as a configurable controller-based order, and its lifecycle table describes affected K9C lines as Mobility Express products. Retain the final domain and software role on the quotation and received unit. Prove the intended controller or Mobility Express state instead of inferring it from the suffix alone.

F regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-13; 5 GHz blocks at 5.250-5.350 and 5.725-5.825 GHz. The F profile is split between a compact mid-lower block and a high block. It does not match the common 5.180 GHz starting point, so imported controller templates require deliberate review. Validate both separated channel groups on the target controller and confirm that the RF survey used the same boundaries. Record any disabled channel and its local regulatory reason.

Procurement inference: the two separated 5 GHz ranges call for a survey that distinguishes the mid-lower group from the high group. Confirm that expected clients, neighboring radios and controller policy can use the approved choices at the destination. When replacing a unit from a different domain, do not preserve old channel assignments blindly; generate a new assignment and compare measured interference in both F-profile groups.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Controller join evidence

Stage the access point on the controller release intended for production. Retain the controller model, software version, discovery path, authorization method and first successful CAPWAP join. Confirm that configuration download completes and that both radios reach an expected operational state. Remove any temporary staging authorization before handover. This evidence separates an orderable access point from a unit that has actually been proven compatible with the planned controller environment. For this 1852 order, include the AireOS or Catalyst 9800 release actually used and note whether the unit is controller-managed or operating in an approved Mobility Express role.

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. The 1852 draws up to 20.9 W; 802.3af also disables AUX Ethernet and USB, while the external-antenna 1852e reduces its 2.4 GHz radio from 3x4 to 2x3.

Ethernet and cabling proof

Preserve the permanent-link test, patch-lead identities, switch port, negotiated Ethernet rate and error counters. Investigate pair faults, excessive length or rate fallback before wireless acceptance begins. A link light only proves connectivity at some rate; it does not demonstrate the intended uplink performance. Tie the cable result to the AP serial so a later throughput problem can be separated from radio, controller and wired-path causes. The platform has one PoE Gigabit interface and one Gigabit AUX interface used for link aggregation, so preserve both link states and the power condition under which AUX is available.

Mechanical installation record

List the bracket, ceiling or wall interface, enclosure requirement, safety restraint, service clearance and cable-entry plan before scheduling installation. Receiving should identify missing mechanical items before the access point reaches site. Photograph the mounted label and final cable entry, then record how the unit can be reached for replacement. A complete electronic order can still be an unusable deployment kit when mechanical dependencies are omitted. The 1852i and 1852e have different operating-temperature ranges, and an external-antenna deployment also requires a complete cable and mounting bill of materials.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. A spare 1852 must be checked against the protected controller release, certificate behavior, regulatory domain, antenna form and 2027 support cutoff before assignment.

Change-window controls

Document staging evidence, production window, installer, rollback owner and measurable success criteria. Preserve the prior controller or AP state needed for recovery. After the change, close temporary credentials, compare authentication, monitoring and RF results with the approved baseline, and record the final decision. The work is not complete merely because the unit powers on or appears in a controller list. Rollback must account for controller image alignment, country configuration and any Mobility Express primary role, not only the physical swap.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Cisco names the Catalyst 9115AX family as the migration option in the lifecycle bulletin; map controller, power, cabling, mount and antenna changes before replacement.

Handover completeness

The handover package should include exact order identity, destination approval, serial record, controller evidence, switch port, mounting or antenna record, user-path tests and named operational owners. Review the package with the receiving team and list unresolved exceptions. A unit is not operationally accepted when important evidence remains only in installer notes, email attachments or an unowned temporary dashboard. The final handover should include the exact PID, regulatory approval, serial, antenna or mounting record, power mode, both Ethernet interfaces and lifecycle owner.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852E-F-K9 - compare antenna form and domain evidence.
• AIR-AP1852E-F-K9C - compare antenna form and domain evidence.
• AIR-AP1852I-FK910C - compare order form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.