AIR-AP1852I-D-K9C identifies the D-domain Mobility Express form of the internal-antenna Aironet 1852i. It supports three spatial streams at 2.4 GHz and four at 5 GHz, with one PoE Gigabit port plus an AUX Gigabit port.
The D row in Cisco's table contains 2.412-2.462 GHz, eight 5 GHz channels from 5.180-5.320 GHz and five from 5.745-5.825 GHz. It does not list a 5.500-5.700 GHz block. Validate the controller country and local approval rather than copying the broader AIR-AP1852I-Z-K9C plan.
Cisco identifies K9C models as factory-shipped with Mobility Express. For replacement stock, record image version, country, primary election, managed AP count, client count and backup checksum. Confirm that the unit can resume the intended primary role and that configuration rollback is understood.
The AUX and USB interfaces are unavailable when 802.3af supplies the 1852i. Check power negotiation before testing LAG, then log both link states, PoE source, radio status, bracket condition and coverage at the intended mounting position.
This exact D-domain K9C PID appears in Cisco's retirement bulletin. Service-contract renewal ends 27 July 2026 and last support is 30 April 2027. Treat controller compatibility and migration to the Catalyst 9115AX family as purchase gates.
Official evidence: Cisco D-domain spectrum and reduced-power behavior, Cisco Mobility Express identity and mounting guide, Cisco exact D-domain retirement row and Cisco regulatory approval lookup.
| Exact model / SKU | AIR-AP1852I-D-K9C |
| Exact PID | AIR-AP1852I-D-K9C |
| Product identity | D-domain internal-antenna Mobility Express Aironet 1852i |
| D-domain 2.4 GHz | 2.412-2.462 GHz; three nonoverlapping channels |
| D-domain 5 GHz | 5.180-5.320 GHz (8) and 5.745-5.825 GHz (5) |
| Radio design | 2.4 GHz 3x4:3; 5 GHz 4x4:4 |
| Interfaces | One PoE Gigabit uplink and one Gigabit AUX/LAG port |
| Reduced-power effect | 802.3af disables AUX Ethernet and USB |
| Controller evidence | Capture image, country, primary state, AP/client inventory, backup and rollback |
| Physical acceptance | Verify internal antenna enclosure, bracket, links, power and coverage |
| Lifecycle | Service renewal ends 2026-07-27; last support 2027-04-30; Catalyst 9115AX migration |
| Acceptance | Exact D PID/serial, approval, two-block 5 GHz set, role recovery, PoE/AUX, radio and mount |
| Source match | AIR-AP1852I-D-K9C: exact exact D-domain K9C 1852i, two-block 5 GHz plan, Mobility Express continuity and service-renewal cutoff verified |
| Official manufacturer reference | Cisco exact Aironet 1850 lifecycle table |
Product Quotation | ![]() | Condition and Packaging | |
![]() | Technical Support Enquiry | Returns and Replacement | |
Shipping Arrangements | ![]() | Warranty Terms |
AIR-AP1852I-D-K9C Cisco Aironet 1852i 4x4 MIMO Access Point is a CISCO Aironet 1850 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For AIR-AP1852I-D-K9C, the manufacturer specification lists radio design as 2.4 GHz 3x4:3; 5 GHz 4x4:4.
For AIR-AP1852I-D-K9C, the manufacturer specification lists interfaces as One PoE Gigabit uplink and one Gigabit AUX/LAG port.
For AIR-AP1852I-D-K9C, the manufacturer specification lists reduced-power effect as 802.3af disables AUX Ethernet and USB.
Contact YYST Global to confirm availability for AIR-AP1852I-D-K9C, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products

AIR-AP1852I-EK9-RF is the remanufactured order mapped by Cisco to AIR-AP1852I-E-K9. Cisco identifies this exact order as an 802.11ac Wave 2 access point with internal antennas, 4x4:4SS and the E regulatory domain.

AIR-AP1852I-C-K9 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit fixed-domain K9 order for regulatory-domain token C. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.

AIR-AP1852I-Z-K9 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit fixed-domain K9 order for regulatory-domain token Z. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.

AIR-AP1852I-S-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token S. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.

AIR-AP1852I-K-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token K. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.

AIR-AP1852I-K-K9 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit fixed-domain K9 order for regulatory-domain token K. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.

AIR-AP1852I-I-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token I. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.

AIR-AP1852I-EK910 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a fixed-domain K910 ten-access-point pack for regulatory-domain token E. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.