Cisco Antenna, 4.9-5.8GHz/17dBi/90~ Sector/N Connector
AIR-ANT5117S-N
Price:Request a quote
CISCO AIR-ANT5117S-N Antenna 2.4 5 5.8 GHz product image

CISCO AIR-ANT5117S-N Antenna 2.4 5 5.8 GHz

AIR-ANT5117S-N

AIR-ANT5117S-N is a Cisco 90-degree sector antenna for 4.9 to 5 GHz, rated 17 dBi and using N-type. It is an antenna only.

New Factory Sealed
Request current pricing
mastercard paypal t-t visa
Cisco Antenna, 4.9-5.8GHz/17dBi/90~ Sector/N Connector
Technical Support Enquiries
Confirm scope and response arrangements
  • 763 412 7282
  • +86 010 69614620

AIR-ANT5117S-N Overview

AIR-ANT5117S-N: deployment-specific antenna record

AIR-ANT5117S-N is a high-gain 17-dBi sector for 4.9/5-GHz outdoor mesh designs, with a 90-degree horizontal sector and narrow vertical pattern.

Record mast azimuth, downtilt, sector boundary, overlap and exclusion zone. High gain must be reconciled with local EIRP limits and radio settings before activation.

Compatibility and acceptance

Verify the exact Cisco radio, connector, number of RF ports, supported frequency band, mounting hardware and regulatory EIRP before purchase. Record cable loss, orientation and post-install RF measurements.

Lifecycle

Check Cisco's current support and replacement guidance before adding this legacy antenna to a new design.

Official source: Cisco official AIR-ANT5117S-N documentation.

AIR-ANT5117S-N Specification

Exact model / SKUAIR-ANT5117S-N
Exact antenna PIDAIR-ANT5117S-N
Frequency band4.9 to 5 GHz
Gain17 dBi
Pattern and form90-degree sector antenna
ConnectorN-type
Mounting rolemast-mounted sector for outdoor mesh coverage
Access point includedNo
Purchase checksRadio compatibility, RF-port count, connector, survey pattern, cable loss, mount, grounding and regulatory limit
Source matchAIR-ANT5117S-N: exact frequency, gain, pattern, connector and mounting role mapped to Cisco documentation; deployment-specific collision distinction added
Official manufacturer referenceCisco official AIR-ANT5117S-N documentation

AIR-ANT5117S-N Ordering Information

This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.

AIR-ANT5117S-N FAQ

What is AIR-ANT5117S-N used for?

Cisco Antenna, 4.9-5.8GHz/17dBi/90~ Sector/N Connector is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.

Which products are compatible with AIR-ANT5117S-N?

Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.

What is included with AIR-ANT5117S-N?

Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.

What is the price of AIR-ANT5117S-N?

Please request a quote for AIR-ANT5117S-N. Final pricing depends on stock, quantity, configuration and delivery destination.

Related products

Related AIR-ANT5117S-N

View More
Cisco AIR-ANT5114P-N — 4.9–5.85 GHz directional patch array
AIR-ANT5114P-N

Cisco AIR-ANT5114P-N — 4.9–5.85 GHz directional patch array

AIR-ANT5114P-N is Cisco's directional 2 × 2 patch-array antenna with a female N connector. Gain is 13 dBi from 4900–5470 MHz and 14 dBi from 5470–5850 MHz.

CISCO Cisco Antenna 2.4 5 5.8 GHz
Cisco AIR-ANT5135SDW-R Indoor 5 GHz 3.5 dBi Omnidirectional Antenna
AIR-ANT5135SDW-R

Cisco AIR-ANT5135SDW-R Indoor 5 GHz 3.5 dBi Omnidirectional Antenna

AIR-ANT5135SDW-R is a short indoor 5 GHz antenna with 3.5 dBi peak gain and an RP-TNC jack. It is not an access point or WLAN controller.

CISCO Cisco Antenna 2.4 5 5.8 GHz
Cisco AIR-ANT5195P-R — 5 GHz 9.5 dBi patch antenna
AIR-ANT5195P-R

Cisco AIR-ANT5195P-R — 5 GHz 9.5 dBi patch antenna

Cisco AIR-ANT5195P-R is a 9.5 dBi, vertically polarized 2 × 2 patch array for 5150–5850 MHz. Its attached lead ends in an RP-TNC male connector.

CISCO Cisco Antenna 2.4 5 5.8 GHz
Cisco AIR-ANT5135D-R — 5 GHz articulated dipole
AIR-ANT5135D-R

Cisco AIR-ANT5135D-R — 5 GHz articulated dipole

AIR-ANT5135D-R is Cisco's black 3.5 dBi articulated dipole for 5150–5850 MHz. Its horizontal radiation pattern is omnidirectional; this is not an outdoor directional panel.

CISCO Cisco Antenna 2.4 5 5.8 GHz
Cisco AIR-ANT5135DB-R 5-GHz 3.5-dBi Articulated Dipole Antenna
AIR-ANT5135DB-R

Cisco AIR-ANT5135DB-R 5-GHz 3.5-dBi Articulated Dipole Antenna

Cisco AIR-ANT5135DB-R is a black articulated dipole antenna for the 5-GHz band, with 3.5-dBi nominal gain and an RP-TNC connector. It is an antenna component, not a complete wireless access point.

CISCO Cisco Antenna 2.4 5 5.8 GHz
AIR-ANT5170P-R - Cisco Aironet 7-dBi Diversity Patch Antenna
AIR-ANT5170P-R

AIR-ANT5170P-R - Cisco Aironet 7-dBi Diversity Patch Antenna

AIR-ANT5170P-R is a Cisco diversity patch antenna for 5.15 to 5.85 GHz, rated 7 dBi and using RP-TNC with 36-inch plenum-rated cable. It is an antenna only.

CISCO Cisco Antenna 2.4 5 5.8 GHz
Cisco AIR-ANT5145V-R, 5GHz, 4.5dBi, RP-TNC, Antenna
AIR-ANT5145V-R

Cisco AIR-ANT5145V-R, 5GHz, 4.5dBi, RP-TNC, Antenna

AIR-ANT5145V-R is a Cisco low-profile omnidirectional antenna for 5 GHz, rated 4.5 dBi and using RP-TNC. It is an antenna only.

CISCO Cisco Antenna 2.4 5 5.8 GHz
Cisco AIR-ANT2566P4W-RS Self-Identifying Four-Element Dual-Band Patch Antenna
AIR-ANT2566P4W-RS

Cisco AIR-ANT2566P4W-RS Self-Identifying Four-Element Dual-Band Patch Antenna

AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.

CISCO Cisco Antenna 2.4 5 5.8 GHz