AIR-ANT5170P-R is a 5-GHz 7-dBi diversity patch with RP-TNC leads, a 36-inch plenum cable and approximately 70 by 50 degree beamwidth.
Install it on a vertical surface and preserve diversity-port mapping. Validate front-to-back isolation and target-area coverage; it is not the three-element MIMO 5160NP panel.
Verify the exact Cisco radio, connector, number of RF ports, supported frequency band, mounting hardware and regulatory EIRP before purchase. Record cable loss, orientation and post-install RF measurements.
Check Cisco's current support and replacement guidance before adding this legacy antenna to a new design.
Official source: Cisco official AIR-ANT5170P-R documentation.
| Exact model / SKU | AIR-ANT5170P-R |
| Exact antenna PID | AIR-ANT5170P-R |
| Frequency band | 5.15 to 5.85 GHz |
| Gain | 7 dBi |
| Pattern and form | diversity patch antenna |
| Connector | RP-TNC with 36-inch plenum-rated cable |
| Mounting role | indoor or outdoor vertical surface; 70 by 50 degree beamwidth |
| Access point included | No |
| Purchase checks | Radio compatibility, RF-port count, connector, survey pattern, cable loss, mount, grounding and regulatory limit |
| Source match | AIR-ANT5170P-R: exact frequency, gain, pattern, connector and mounting role mapped to Cisco documentation; deployment-specific collision distinction added |
| Official manufacturer reference | Cisco official AIR-ANT5170P-R documentation |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
AIR-ANT5170P-R - Cisco Aironet 7-dBi Diversity Patch Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
Please request a quote for AIR-ANT5170P-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

AIR-ANT5175V-N is a Cisco outdoor omnidirectional colinear array for 4.9 to 5.85 GHz, rated 6.5 dBi in 4.9 GHz and 7.5 dBi in 5.4-5.85 GHz and using N-male. It is an antenna only.

Cisco AIR-ANT5135DB-R is a black articulated dipole antenna for the 5-GHz band, with 3.5-dBi nominal gain and an RP-TNC connector. It is an antenna component, not a complete wireless access point.

AIR-ANT5145V-R is a Cisco low-profile omnidirectional antenna for 5 GHz, rated 4.5 dBi and using RP-TNC. It is an antenna only.

AIR-ANT5117S-N is a Cisco 90-degree sector antenna for 4.9 to 5 GHz, rated 17 dBi and using N-type. It is an antenna only.

AIR-ANT5140V-R is a Cisco right-angle omnidirectional antenna for 5 GHz, rated 4 dBi and using RP-TNC. It is an antenna only.

AIR-ANT5160NP-R is a Cisco three-element MIMO patch for 5.15 to 5.85 GHz, rated 6 dBi and using RP-TNC with 3-foot plenum-rated cable. It is an antenna only.

AIR-ANT5180V-N is a Cisco compact omnidirectional antenna for 4.9 and 5 GHz, rated 7 dBi at 4.9 GHz and 8 dBi at 5 GHz and using N-type. It is an antenna only.

AIR-ANT5135DG-R is a Cisco Aironet gray articulated dipole for 5 GHz, rated 3.5 dBi, using RP-TNC. It is an antenna only; no access point or radio is included.