AIR-ANT25137NP-R is one six-element dual-band Cisco MIMO patch-array antenna. It covers 2400-2500 MHz and 5250-5850 MHz with published peak gain of 13 dBi at 2.4 GHz and 7 dBi at 5 GHz.
Cisco lists 36-degree E/H beamwidth at 2.4 GHz and 48/55-degree E/H beamwidth at 5 GHz. The 2.4 GHz leads use vertical/horizontal/vertical polarization, while all 5 GHz elements are vertical. Aim the panel from an RF design rather than treating it as omnidirectional.
The official guide describes use with Cisco Aironet 3502P access points. The antenna has 36-inch leads with RP-TNC male connectors. Verify every radio chain, regulatory domain and approved antenna list before using another platform.
Cisco specifies IP65, 100 mph operational wind and -30 to 70 C operation. The 7.75 lb antenna-and-bracket assembly requires adequate pullout strength, grounding, lightning protection and correct azimuth/elevation adjustment.
This page represents one antenna assembly. For the Cisco quantity-four order, compare AIR-ANT25137NP-R4 and verify that four complete brackets and lead sets are actually required.
Official source: Cisco AIR-ANT25137NP-R installation and specification guide.
| Exact model / SKU | AIR-ANT25137NP-R |
| Order identity | One six-element dual-band MIMO patch-array antenna |
| Frequency ranges | 2400-2500 MHz and 5250-5850 MHz |
| Peak gain | 13 dBi at 2.4 GHz; 7 dBi at 5 GHz |
| Beamwidth | 2.4 GHz: 36/36 degrees E/H; 5 GHz: 48/55 degrees E/H |
| Cable and connector | 36 in leads; RP-TNC male |
| Environmental rating | IP65; -30 to 70 C; 100 mph operational wind |
| Original platform scope | Cisco Aironet 3502P |
| Receiving gate | Inspect one radome, bracket, all leads/connectors and chain labels |
| Source match | AIR-ANT25137NP-R: exact Cisco antenna band, pattern, gain, connector, environment and compatibility verified |
| Official manufacturer reference | Cisco AIR-ANT25137NP-R official guide |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Cisco AIR-ANT25137NP-R Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
Please request a quote for AIR-ANT25137NP-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

AIR-ANT25137NP-R4 is Cisco's quantity-four order for the AIR-ANT25137NP-R six-element dual-band patch array. Each antenna is rated at 13 dBi for 2.4 GHz and 7 dBi for 5 GHz and uses RP-TNC male leads.

AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.

AIR-ANT2524DW-R is the white, non-self-identifying dual-band dipole antenna. Cisco lists 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz.

AIR-ANT2524V4C-R is a four-element indoor ceiling antenna for 2.4 and 5 GHz MIMO radios. Cisco specifies 2 dBi and 4 dBi peak gain respectively.

Cisco AIR-ANT2506 is a 5.2 dBi omnidirectional mast-mount antenna for 2.4 GHz WLAN radios with an RP-TNC connection. It is suitable for indoor or outdoor installation.

Cisco AIR-ANT2524DW-RS is a white indoor dual-band antenna with self-identification circuitry, 2 dBi gain at 2.4 GHz and 4 dBi at 5 GHz. It is an antenna accessory, not an access point.

AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.

AIR-ANT2422DW-R is an indoor articulated dipole for 2.4 GHz Cisco Aironet radios with an RP-TNC connector. It is not an AP or controller.