This antenna has linear vertical polarization and specified 56-degree E-plane and 66-degree H-plane beamwidths. Select it for a directional RF requirement, not as a controller upgrade or an omnidirectional ceiling antenna.
Cisco lists a 91.4 cm plenum-rated cable and a 12.9 by 12.9 by 2.3 cm enclosure. Outdoor installation requires the rear orientation arrow to point upward; follow the complete manufacturer mounting and grounding instructions with a qualified installer.
Bulletin EOL11425 includes AIR-ANT2485P-R. End of sale was August 25, 2017 and the last support date was August 31, 2022. The notice lists no replacement for this specific part; do not read that historical statement as a current inventory report.
Document the host Aironet radio, the cable route, required mounting hardware and supplied condition. An antenna listing does not establish bridge range, weatherproof connector work, stock availability or continued manufacturer support.
Manufacturer patch-antenna specifications and installation instructions · AIR-ANT2485P-R lifecycle entry
| Order code | AIR-ANT2485P-R |
|---|---|
| Design | Single patch; indoor/outdoor |
| Frequency | 2400–2484 MHz |
| Peak gain | 8.5 dBi |
| Impedance | 50 ohms |
| Connector | RP-TNC |
| Beamwidth | E-plane 56 degrees; H-plane 66 degrees |
| Support endpoint | August 31, 2022 |
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Cisco AIR-ANT2485P-R 2.4 GHz 8.5 dBi Single Patch Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
Please request a quote for AIR-ANT2485P-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

AIR-ANT24120 is a 12 dBi omnidirectional mast-mount antenna for compatible 2.4 GHz Aironet radios using RP-TNC. It is an antenna, not a WLAN controller.

AIR-ANT2422DW-R is an indoor articulated dipole for 2.4 GHz Cisco Aironet radios with an RP-TNC connector. It is not an AP or controller.

AIR-ANT2410Y-R is a six-element directional Yagi antenna with 10 dBi gain for compatible 2.4 GHz Aironet radios. Its cable terminates in an RP-TNC plug.

Cisco AIR-ANT2465P-R is a 2.4 GHz diversity patch antenna with 6.5 dBi peak gain, vertical polarization and RP-TNC connections. It differs from the single-patch AIR-ANT2460P-R.

AIR-ANT2414S-R is a Cisco outdoor 2.4 GHz sector antenna with 90-degree azimuth coverage. Its specified 14 dBi gain includes the supplied 1.5 m cable.

AIR-ANT2460P-R is a Cisco 6 dBi single-patch antenna covering 2400–2484 MHz. It uses vertical polarization and an RP-TNC connection for compatible 2.4 GHz Aironet radios.

AIR-ANT2460NP-R is a Cisco MIMO directional patch antenna for 2.4 GHz, rated 6 dBi and using RP-TNC. It is an antenna only.

AIR-ANT2566P4W-RS is a self-identifying four-element patch antenna with 6 dBi gain in both 2.4 and 5 GHz bands. It is not a WLAN controller.