JZ354A is a ARUBA wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.
YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.
Product name: JZ354A- HPE Aruba Networking AP‑555 (IL)-Internal Wireless Access Point. Category: HPE Wireless. Condition: New Factory Sealed.
| Datasheet series | HPE Aruba Access Points |
| Exact model | JZ354A |
| Management check | Confirm Aruba Central, controller, AirWave or local management requirements |
| Official datasheet | HPE Aruba access points official product page |
Product Number | JZ354A |
Differentiator | Available in Israel only |
Certifications | UL2043 plenum rating Bluetooth SIG WI-FI Alliance: Wi-Fi CERTIFIED a, b, g, n, ac, ax WPA, WPA2 and WPA3 Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE) WMM, WMM-PS, W-Fi Agile Multiband Wi-Fi CERTIFIED Location™ |
Regulatory | FCC/ISED CE Marked RED Directive 2014/53/EU EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU UL/IEC/EN 62368-1 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, contact your HPE representative |
Wi-Fi antenna | Integrated downtilt omni-directional antennas for 4x4 MIMO in 2.4 GHz with peak antenna gain of 4.3 dBi, and 8x8 MIMO in 5 GHz with peak antenna gain of 5.8 dBi in 5 GHz. In tri-radio mode, the peak gain of the antennas for each of the 4x4 5 GHz radios is 5.5 dBi (radio 0L, lower half of 5GHz) and 5.6 dBi (radio 0U, upper half of 5 GHz). Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees. |
Connectivity, standard | Wi-Fi 6 (IEEE 802.11ax) |
Ports | E0, E1: HPE Smart Rate port (RJ-45, maximum negotiated speed 5 Gbps) Serial console interface (proprietary, micro-B USB physical jack) USB 2.0 host interface (Type A connector) |
Mounting | Pre-installed mounting bracket, for use with optional mounting kit, see the ordering guide. |
Power consumption | Maximum (worst-case) power consumption (dual-radio operation): DC powered: 32.6W PoE powered (802.3bt or dual 802.3at): 38.2W PoE powered (802.3at, IPM disabled): 25.1W All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 6.0W (PoE powered) or 5.4W (DC powered). Maximum (worst-case) power consumption in idle mode (dual-radio operation): 15.0W (PoE) or 15.1W (DC) Maximum (worst-case) power consumption in deep-sleep mode: 3.8W(PoE) or 3.6W (DC) |
Radio coverage | AP type: Indoor, dual/tri-radio, 5 GHz and 2.4 GHz 802.11ax 4x4 MIMO 5 GHz radio (dual-radio operation): Eight spatial stream HE80 (or 4SS HE160) MIMO for up to 4.8 Gbps wireless data rate 5 GHz radio (tri-radio operation): Four spatial stream HE80 (or 2SS HE160) MIMO for up to 2.4 Gbps wireless data rate 2.4 GHz radio: Four spatial stream HE40 (HE20) MIMO for up to 1,147 Mbps (574Mbps) |
Product Quotation | ![]() | Condition and Packaging | |
Return Eligibility | Returns and Replacement | ||
Shipping Arrangements | ![]() | Warranty Terms |
JZ354A- HPE Aruba Networking AP‑555 (IL)-Internal Wireless Access Point is a ARUBA HPE Wireless product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For JZ354A, the manufacturer specification lists ports as E0, E1: HPE Smart Rate port (RJ-45, maximum negotiated speed 5 Gbps) Serial console interface (proprietary, micro-B USB physical jack) USB 2.0 host interface (Type A connector).
Contact YYST Global to confirm availability for JZ354A, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
The current reference price for JZ354A is US$ 880.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products

JZ031A identifies the Aruba AP-345 (RW) unified campus access point with internal antennas. Its two 4x4 radios support conventional dual-band or optional dual-5-GHz operation, with a 2.5 GbE SmartRate and a separate 1 GbE uplink.

HPE lists JZ038A as the IL FIPS/TAA variant of AP-345. It is an internal-antenna campus access point with dual 4x4 MU-MIMO radios, not an AP22 or an external-connector AP-344.

The JZ036A order identifies Aruba AP-345 (JP) FIPS/TAA with internal antennas. The 340-series hardware has dual 4x4 MU-MIMO radios and distinct 2.5 GbE SmartRate and 1 GbE Ethernet interfaces.

JZ034A is HPE Aruba AP-345 (US) FIPS/TAA, an internal-antenna unified campus AP with two 4x4 MU-MIMO radios. Its SmartRate network port negotiates up to 2.5 GbE; a second port supports 1 GbE.

HPE identifies JZ039A as AP-345 (EG), a unified campus access point with internal antennas and dual 4x4 MU-MIMO radios. It uses the Aruba 340 platform and supports a 2.5 GbE SmartRate connection.

JZ040A is the EG FIPS/TAA order of Aruba AP-345. This 340-series campus access point has internal antennas, two 4x4 MU-MIMO radios and a SmartRate uplink; it is not an Instant On AP22.

R3K00A identifies the HPE Aruba AP-AC2-12B external AC/DC desktop power adapter. It is a power accessory, not a wireless access point; confirm the offered unit label and device requirements before purchase.

HPE identifies R7J35A as AP-655 (EG), an internal-antenna Wi-Fi 6E campus AP. Its three 4x4 radios cover 2.4 GHz, 5 GHz and 6 GHz concurrently, with a published combined maximum of 7.8 Gbps.