



Huawei CE6885H-48YS8CQ Switch: CE6885H-48YS8CQ Dimensions with packaging (H x W x D) [mm (in.)]: 185 mm x 650 mm x 550 mm (7.28 in. x 25.59 in.
CE6885H-48YS8CQ is identified in the official specification by weight without packaging [kg (lb)] of six.eighty-four kg (fifteen.eight lb), excluding optical modules, power modules, and fan modules and weight without packaging (full configuration) [kg (lb)] of nine.three kg (nineteen.ninety-one lb) (including AC power modules and fan modules but excluding optical modules. If the device supports multiple models of modules, the heaviest modules are used for the measurement.). Its exact configuration also lists weight with packaging [kg (lb)] of eleven.eleven kg (twenty-four.forty-nine lb) and weight with packaging (full configuration) [kg (lb)] of thirteen.three kg (twenty-nine.thirty-two lb). These fields should be matched to the bill of materials because they distinguish this SKU from adjacent Huawei CE6800 Series Switches variants.
Table 4-157 Technical specifications of the CE6885H-48YS8CQ
| Item | Specification |
|---|---|
| Dimensions with packaging (H x W x D) [mm (in.)] | 185 mm x 650 mm x 550 mm (7.28 in. x 25.59 in. x 21.65 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] |
|
| Weight without packaging [kg (lb)] | 6.84 kg (15.08 lb), excluding optical modules, power modules, and fan modules |
| Weight without packaging (full configuration) [kg (lb)] | 9.03 kg (19.91 lb) (including AC power modules and fan modules but excluding optical modules. If the device supports multiple models of modules, the heaviest modules are used for the measurement.) |
| Weight with packaging [kg (lb)] | 11.11 kg (24.49 lb) |
| Weight with packaging (full configuration) [kg (lb)] | 13.3 kg (29.32 lb) |
| Chassis height [U] | 1 U |
| Installation Type | Cabinet installation |
| Switching capacity | To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel. |
| CPU | 16-core, 2 GHz |
| Memory | DRAM: 16 GB |
| NOR Flash | 64 MB x 2 |
| SSD Flash | 4GB SSD |
| USB | It can be used for log backup and USB-based deployment. This function is reserved. |
| Power supply mode |
|
| Console port | RJ45 |
| Downlink Service interface | 48 x 25GE SFP28/48 x 50GE SFP56 |
| Uplink Service interface | 8 x 100GE QSFP28/8 x 200GE QSFP56 |
| Service port supporting the stack function | Reserved function. This function is not enabled. |
| RTC | Supported |
| Typical power consumption [W] | 48 x 25GE + 8 x 100GE ports: 207 W (100% traffic load, copper cables on 24 x 25GE + 4 x 100GE ports, normal temperature, dual AC power modules) 218 W (100% traffic load, short-distance optical modules on 24 x 25GE + 4 x 100GE ports, normal temperature, dual AC power modules) |
| Typical heat dissipation [BTU/hour] | 48 x 25GE + 8 x 100GE ports: 706 BTU/hour (100% traffic load, copper cables on 24 x 25GE + 4 x 100GE ports, normal temperature, dual AC power modules) 744 BTU/hour (100% traffic load, short-distance optical modules on 24 x 25GE + 4 x 100GE ports, normal temperature, dual AC power modules) |
| Static power consumption [W] | 196 W |
| Static heat dissipation [BTU/hour] | 669 BTU/hour |
| Maximum power consumption [W] | 48 x 25GE + 8 x 100GE ports: 255 W (100% traffic load, short-distance optical modules on all ports, normal temperature, dual AC power modules) 372 W (100% traffic load, long-distance optical modules on all ports, high temperature, dual AC power modules) |
| Maximum heat dissipation [BTU/hour] | 48 x 25GE + 8 x 100GE ports: 870 BTU/hour (100% traffic load, short-distance optical modules on all ports, normal temperature, dual AC power modules) 1269 BTU/hour (100% traffic load, long-distance optical modules on all ports, high temperature, dual AC power modules) |
| Number of power modules | 2 |
| Redundant power supply | 1+1 backup |
| Rated input voltage [V] |
|
| Input voltage range [V] |
|
| Maximum input current [A] |
|
| Rated output power [W] |
|
| Certification |
|
| Power supply surge protection [kV] | AC: 6 kV in common mode and 6 kV in differential mode DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
| Types of fans | Pluggable |
| Number of fan modules | 5 |
| Redundant fans | The device supports 4+1 backup of fan modules that work in hot standby mode. The system can operate normally for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
| Heat dissipation mode | Air cooling |
| Airflow direction | Port-side air intake or port-side air exhaust, depending on the fan modules and power modules that are used. The fan modules and power modules must have the same airflow direction. |
| MTBF [year] | 44.34 years |
| Noise at normal temperature (27°C, sound pressure) [dB(A)] | Front-to-back airflow: Average: 52.8 dB(A); max: 58.7 dB(A) Back-to-front airflow: Average: 51.3 dB(A); max: 59.0 dB(A) |
| Noise at high temperature (40°C, sound pressure) [dB(A)] | Front-to-back airflow: Average: 69.5 dB(A); max: 76.0 dB(A) Back-to-front airflow: Average: 70.2 dB(A); max: 75.6 dB(A) |
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) NOTE: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Storage temperature [°C (°F)] | -40ºC to +70ºC (-40°F to +158°F) |
| RTU License Supported | Yes. By default, 48 x 25GE ports can only work at the rate of 25 Gbit/s, and eight 100GE ports can only work at the rate of 100 Gbit/s. You can use the RTU license (BOM number: 88036EUQ) to increase the rate of 25GE ports to 50 Gbit/s and the rate of 100GE ports to 200 Gbit/s. |
| Exact product model | CE6885H-48YS8CQ |
| Product family | Huawei CloudEngine data center switch |
| Official Huawei documentation | Huawei Enterprise Support results for CE6885H-48YS8CQ |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |
For CE6885H-48YS8CQ, the manufacturer specification lists dimensions with packaging (h x w x d) [mm (in.)] as 185 mm x 650 mm x 550 mm (7.28 in. x 25.59 in. x 21.65 in.).
Related products

CE6885-LL-56F is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6880-24S4Q2CQ-EI is a 1U Huawei CloudEngine CE6800 data center switch. Its exact Huawei hardware page documents AC or DC power, hot-swappable power and fan modules, bidirectional airflow options and support for 10GE, 40GE and 100GE service ports.

CE6881-48T6CQ-K is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6880-48S4Q2CQ-EI is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6881-48S6CQ-K is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

CE6881-48S6CQ is listed in Huawei CE6800 Series Switches. Check model compatibility, current stock, condition and quotation details.

Huawei CE6857E-48T6CQ is a 1U CloudEngine switch with 48 x 10GE RJ45 downlinks and 6 x 100GE QSFP28 uplinks. Power, fan airflow and software-dependent port breakout must be verified.

Huawei CE6863-48S6CQ-K is a fixed 1U data-center switch with 48 x 25GE SFP28 access ports and 6 x 100GE QSFP28 uplinks. Match the power and fan airflow direction before ordering.