HPE JG722A 850 Unified Wired-WLAN Appliance
- 763 412 7282
- +86 010 69614620
JG722A Overview
The HPE 850 order and its wired interfaces
JG722A identifies the HPE 850 Unified Wired-WLAN Appliance. This is a 1U physical WLAN-control appliance with Ethernet interfaces, not an Aruba radio access point. The exact JG722A technical table specifies eight dual-personality Gigabit ports and two 10GbE SFP+ ports. It also separates the RJ45 serial console from the RJ45 out-of-band management connection.
Count active dual-personality ports correctly
Each of the eight Gigabit ports provides the documented copper or SFP media option. The eight RJ45 connectors and their SFP alternatives must not be counted as sixteen independent Gigabit ports. Plan the active media for each connection and list the required transceivers and cables on the quotation. The two SFP+ interfaces provide a separate 10GbE connection option; an interface specification does not establish that its optical module is supplied.
Size AP licensing from the exact appliance table
HPE documents 64 default supported APs for JG722A and expansion to a maximum of 512 through optional 32- or 128-AP E-LTUs. The primary-appliance upgrade references are JG774AAE and JG649AAE. These are historical platform and licensing rules, rather than proof of the rights installed on an offered unit. Confirm the current AP authorization, activation or transfer eligibility and the applicable AP firmware mapping before accepting a replacement configuration.
Verify power contents and the rack envelope
The base JG722A configuration includes one JG745A X351 150W AC power supply. The chassis has two power-supply slots and requires at least one installed supply. Two slots do not mean that a redundant pair is included in a sales offer. Confirm the actual power modules, input type and regional cord on the quotation. The reference dimensions are 44 cm wide, 42 cm deep and 4.36 cm high, occupying 1U in an EIA-standard 19-inch rack.
Keep throughput figures separate from workload acceptance
The exact-model specification lists 10,000 clients and 10G centralized throughput as maximum platform figures. They are not a guarantee for a particular radio estate, traffic mix or software release. For a migration, identify the AP models, management path, forwarding mode and installed software before comparing the replacement to the existing controller. The documented operating range is 0 to 45 degrees Celsius.
Procure a legacy unit with a clear support boundary
The retrieved HPE QuickSpecs is marked retired and says its listed base products are obsolete and no longer available for sale from the manufacturer. Use the document as identification and configuration reference; it does not establish present factory availability, current firmware maintenance or support eligibility. Request the exact order code, unit condition, licensed AP count, supplied power modules, optics, rack parts and support route. The image is HPE's JG722A reference view, not a photograph of current inventory. Availability, delivery time and warranty must be confirmed with the quotation.
Document/Firmware Download
HPE 850 retired QuickSpecs: JG722A identity and exact-model technical table, pages 1 and 16. HPE 850 documentation and software support center. Verify the applicable release and manufacturer access requirements.
JG722A Specification
| Appliance identity | HPE 850 Unified Wired-WLAN Appliance; JG722A |
| Gigabit interface arrangement | 8 dual-personality Gigabit ports with RJ45 100/1000 Mbps or SFP media; not 16 independent active ports |
| 10GbE interfaces | 2 x SFP+ ports; supplied optics require quotation confirmation |
| Administrative interfaces | 1 x RJ45 serial console and 1 x RJ45 out-of-band management port |
| Base power configuration | One JG745A 150W AC supply in the documented base configuration; 2 supply slots, at least 1 installed supply |
| Documented AP limits | 64 default supported APs; maximum 512 with optional 32- or 128-AP E-LTUs; verify offered-unit authorization |
| Platform reference limits | 10,000 clients and 10G centralized throughput; workload and software context must be checked |
| Rack envelope | 1U; 44 x 42 x 4.36 cm, W x D x H; EIA-standard 19-inch rack |
| Lifecycle and temperature | Retired manufacturer QuickSpecs; operating temperature 0 to 45 degrees Celsius |
JG722A Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
JG722A FAQ
What is JG722A?
HPE JG722A 850 Unified Wired-WLAN Appliance is a HPE 850 Unified Wired-WLAN Appliance product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What interfaces and ports does JG722A provide?
For JG722A, the manufacturer specification lists gigabit interface arrangement as 8 dual-personality Gigabit ports with RJ45 100/1000 Mbps or SFP media; not 16 independent active ports.
What are the power requirements for JG722A?
For JG722A, the manufacturer specification lists base power configuration as One JG745A 150W AC supply in the documented base configuration; 2 supply slots, at least 1 installed supply.
Is JG722A available from YYST Global?
Contact YYST Global to confirm availability for JG722A, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
What is the price of JG722A?
The current reference price for JG722A is US$ 200.00. Final pricing can change based on stock, quantity, configuration and delivery destination.