210-24t-GE2

Keep the two optical uplinks separate from the access-port count

The exact front-panel reference assigns 10/100/1000BASE-T sockets to positions 1 through 24 and dedicated 1 GbE SFP interfaces to 25 and 26. They are separate optical positions, rather than shared copper/fiber alternatives. Plan twenty-four copper endpoint connections and a separate two-link optical uplink allocation. The GE2 designation here is Gigabit SFP; a purchasing list that calls for 10Gb uplinks requires a different documented configuration. Specify compatible modules and fiber lengths in the quotation instead of assuming that the open SFP cages establish included transceivers.

Provision administration independently of the data interfaces

The management Ethernet interface is 10/100BASE-T, while the user-facing copper interfaces support Gigabit connections. These two roles have different speed limits. A separate serial console provides local terminal access. The family guide describes attaching the management port to a parallel management network or directly to a laptop. Allocate administration cabling and console access during staging, rather than treating either connector as another Gigabit data uplink. Verify the actual software release, credentials and management configuration with the offered equipment; the hardware drawing does not establish its saved configuration.

Check the AC installation and fixed internal components

The manufacturer’s technical table assigns this exact 24t model a 100–240 V AC input, a maximum input current of 0.5 A and a 50/60 Hz frequency. These input limits are separate from the consumption table, which lists 16.3 W minimum and 25.5 W maximum for 210-24t-GE2. They are published reference values, not a measurement of the offered unit. The 210 family uses a built-in supply that is not user-replaceable and non-replaceable fan modules with side-to-side airflow. The exact rear drawing shows the grounding point and AC connector. Provide side clearance and approved power cabling; do not apply redundant-power features from a 220-series model to this rear panel.

Use unpackaged dimensions for the rack plan

The physical table groups this chassis with the full-width 24- and 48-port 210 enclosures: 4.40 cm high, 44.10 cm wide and 25.40 cm long. The model-specific unpackaged weight is 3.13 kg and includes the installed supply and fan modules. Packaging measurements belong to freight planning and must not replace the chassis dimensions in a cabinet drawing. Confirm the mounting hardware, cable bend allowance, destination power cord and actual condition in the quotation. The displayed drawing documents the exact hardware model; it is not a photograph of current inventory, proof of supplied optics or a support entitlement.

Document/Firmware Download

• Exact 210-24t-GE2 front and rear port map
• 210-series management, cooling and built-in supply context
• Model-specific AC limits, consumption, dimensions and weight
• Exact rear drawing: grounding point and AC input

Manufacturer drawings identify the model and connectors. No present stock, delivery date, software license or lifecycle milestone is inferred.