210-12t-GE2

Fit the small enclosure without assuming a full-width chassis

The manufacturer lists the unpackaged 210-12t-GE2 enclosure at 4.30 cm high, 20.90 cm wide and 25.50 cm long. The 210-series introduction describes the 12-port models as small form-factor switches and permits two such enclosures side by side in a standard rack. Use that arrangement as a planning option, then confirm the correct mounting hardware and its inclusion in the quotation. A bare chassis measurement does not establish that a shelf, paired-switch kit or rack brackets will accompany the offered unit. Its published unpackaged weight is 1.51 kg; shipping weight requires separate packing information.

Map twelve endpoint sockets and two fiber positions

On this exact front panel, data interfaces 1 through 12 are 10/100/1000BASE-T. Positions 13 and 14 are two dedicated 1 GbE SFP interfaces. Allocate endpoint cables to the twelve copper sockets and optical links to the two independent cages. The optical connections are Gigabit interfaces; neither the GE2 suffix nor an unpopulated cage proves 10Gb capability or an included transceiver. Supply the intended module type, fiber path and remote-end speed when requesting a quote. This model-specific numbering differs from the 24-port enclosure, whose fiber positions are 25 and 26.

Reserve an independent route for administration

A separate 10/100BASE-T management connector and serial console sit outside the twelve copper data-port allocation. Their purpose is administration, rather than additional Gigabit endpoint capacity. The family documentation allows the management connector to reach a parallel management network or a laptop. Include the administration path and console access in the installation record. Ask for the offered unit’s software release, access settings and configuration backup before integrating it; the factory connector diagram cannot prove its current credentials, licensing or saved configuration.

Distinguish the AC input rating from consumption

The exact technical table gives 210-12t-GE2 an AC operating range of 100–240 V, a maximum input current of 0.5 A and a 50/60 Hz input frequency. Its consumption reference is 10.5 W minimum and 18.4 W maximum, not the larger 24-port model’s published figures and not a measurement of a particular supplied unit. The built-in supply is not user-replaceable. The official rear drawing identifies the grounding point and AC inlet. Consult the exact installation instructions for ventilation clearance and confirm the correct destination cord and grounding arrangement. The family overview and model-specific acoustics table differ in their cooling descriptions, so no fan count or fan construction is assigned here. A 220-series redundant-power panel is not part of the documented rear layout.

Document/Firmware Download

• Exact 210-12t-GE2 front and rear port map
• 210-series management, cooling and built-in supply context
• Model-specific AC limits, consumption, dimensions and weight
• Exact rear drawing: grounding point and AC input

Manufacturer drawings identify the model and connectors. No present stock, delivery date, software license or lifecycle milestone is inferred.