210-24p-GE2

Start the quote with the powered-device inventory

The exact 210-24p-GE2 hardware reference identifies positions 1 through 24 as Gigabit BASE-T PoE+ ports. Build the proposed endpoint list around both data connections and power demand. Record each device’s required power and how many devices will operate together before requesting the allocation settings and supported deployment details. Twenty-four PoE+ sockets establish the interface type; they do not by themselves prove that every socket can supply its maximum power simultaneously. This is the powered 24p order, rather than 210-24t-GE2, so the two names and their electrical figures should remain separate in a replacement list.

Read the manufacturer’s PoE load cases correctly

The consumption table has two entries for 210-24p-GE2. With no PoE load it lists 21 W minimum and 31 W maximum power consumption. In the separate 185 W of PoE case, maximum switch dissipation is 58 W and maximum total power consumption is 243 W. The 185 W figure describes that published load case; it is not a verified power measurement of the offered unit or an unconditional per-port output promise. Use the actual endpoint plan when checking the upstream electrical circuit and thermal allowance. Do not substitute the 24t model’s 25.5 W maximum or equate AC input current with watts consumed.

Keep optical and administration interfaces out of the PoE count

The two dedicated SFP interfaces occupy positions 25 and 26 and provide 1 GbE fiber connectivity. They are separate from the twenty-four powered copper positions and do not establish 10Gb uplink capability. Confirm the compatible optics and remote interface speed on the quotation; a drawing of an empty cage is not evidence of supplied modules. A separate 10/100BASE-T management Ethernet connector and serial console provide administration paths. Reserve those connections for staging and support access, rather than adding them to the powered endpoint count.

Allow for the fixed AC supply and full-width enclosure

The exact AC table gives a 100–240 V input range, 2.6 A maximum input current and 50/60 Hz frequency. The family guide identifies a built-in supply that is not user-replaceable. Its cooling description uses non-replaceable fans with side-to-side airflow, so check the prescribed side clearance before placing it among other powered equipment. The model’s unpackaged weight is 3.68 kg; the full-width chassis measures 4.40 cm high, 44.10 cm wide and 25.40 cm long. Confirm rack hardware, cord, supplied condition and software access separately. The official front and rear drawings show the exact hardware identity and connectors, not current inventory or the contents of a particular delivery.

Document/Firmware Download

• Exact 210-24p-GE2 front and rear port map
• 210-series management, cooling and built-in supply context
• Model-specific AC limits, consumption, dimensions and weight
• Exact rear drawing: grounding point and AC input

Manufacturer drawings identify the model and connectors. No present stock, delivery date, software license or lifecycle milestone is inferred.