C9120AXI-N Cisco Catalyst 9120AX Dual Band (2.4 GHz and 5 GHz) AP

C9120AXI-N exact order identity

C9120AXI-N is a Cisco Catalyst 9120AX Series indoor Wi-Fi 6 access point with integrated antennas. The exact PID combines the I antenna form, a controller-based access-point order and regulatory-domain token N.

Antenna and installation boundary

Cisco documents four integrated dual-band antennas, four additional single-band 5 GHz antennas used in dual-5-GHz mode, one 2.4 GHz IoT antenna and one dual-band auxiliary-radio antenna. No external antenna is selected by this PID. Mounting position, enclosure orientation and the post-install RF survey are therefore part of the acceptance evidence. The integrated-antenna order does not require an external antenna bill of materials.

Controller-image boundary

Cisco lists this PID without the EWC infix, so the order is the controller-based access-point form rather than an EWC software-image order. Record the target controller model and release. Cisco's getting-started guide requires AireOS 8.9.111.0 or later, or IOS XE 16.11.1b or later, for the 9120AX family.

N regulatory-domain evidence

Cisco uses the final PID letter as a regulatory-domain identifier and requires customers to verify approval for the country of use. The letter is not a country name. For the N-domain order, retain both destination approval and controller evidence before moving the unit from staging to production.

Use the staging-to-production handoff as the N-domain checkpoint. The staging record should contain destination approval, complete PID, serial and controller country; the production owner must accept those same fields. If the AP is moved between managed sites, close the first assignment and create a new reviewed destination record instead of merely changing the location field.

Power and wired-uplink boundary

The family has one 100/1000/2500 Multigigabit Ethernet uplink. Cisco lists full 4x4 radio operation, 2.5-Gigabit Ethernet and USB with 802.3at; under 802.3af both radios reduce to 1x1, Ethernet reduces to 1 GbE and USB is disabled.

External controller decision

This PID does not carry the EWC software-image infix. Record the production controller and supported software release, and verify the live compatibility matrix before an upgrade or substitution.

Deployment evidence worksheet

Ethernet and cabling proof

Preserve the permanent-link test, patch-lead identities, switch port, negotiated Ethernet rate and error counters. Investigate pair faults, excessive length or rate fallback before wireless acceptance begins. A link light only proves connectivity at some rate; it does not demonstrate the intended uplink performance. Tie the cable result to the AP serial so a later throughput problem can be separated from radio, controller and wired-path causes. The wired acceptance result should show whether the single IEEE 802.3bz uplink negotiated at 100 Mbps, 1 Gbps or 2.5 Gbps.

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. Relate the installed radio mode to the survey because the flexible radio can serve 2.4/5 GHz or participate in a dual-5-GHz design.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco makes the customer responsible for country approval; retain the dated compliance lookup instead of inferring a country from the domain letter.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a different access-point order merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A different antenna form, EWC state or regulatory token is a different 9120AX order and requires a new technical acceptance decision.

Security baseline

Retain the approved controller policy, management authorization, certificate or trust workflow, client authentication test and logging destination. Confirm behavior on the deployed controller software instead of promising a protocol from the hardware family name. Remove temporary onboarding access and verify administrative reachability after handover. This keeps product identity separate from software-dependent security claims. The 9120AX data sheet describes platform capabilities; record which security features are actually enabled and validated on the deployed controller release.

Capacity observation

Define the expected concurrent clients, application mix, airtime utilization and channel-width assumptions for this location. After commissioning, capture radio utilization, retry behavior and representative throughput during a meaningful load period. Compare the observation with the survey design and state any shortfall. A peak link rate from a data sheet is not a site capacity result and should not replace measured operating evidence. Capacity acceptance should use observed clients, channel width, airtime and retries rather than the family's maximum over-the-air rate.

Interference baseline

Preserve the pre-install and post-install noise, neighboring-radio and channel-occupancy observations for the selected location. Record any controller-driven channel change during acceptance. If the regulatory profile limits the channel choices, state how that constraint affected reuse and mitigation. This baseline gives future troubleshooting a reference point and prevents an unrelated interference change from being attributed to the hardware order. Preserve the exact enabled-channel export because the regulatory token and destination approval control the usable spectrum.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. For EWC orders, record the 17.15.x support ceiling and a CAPWAP conversion decision; for non-EWC orders, record the external controller lifecycle.

Related Catalyst 9120 order records

• C9120AXP-EWC-N - compare antenna form and domain evidence.
• C9120AXE-EWC-N - compare antenna form and domain evidence.
• C9120AXE-N - compare antenna form and domain evidence.

Official evidence: Cisco Catalyst 9120AX data sheet; Cisco Catalyst 9120AX getting-started guide; Cisco wireless compliance tool.