Cisco AIR-AP3802E-CK910 Wireless Access Point

AIR-AP3802E-CK910: Regulatory release packet for the C-domain pack

AIR-AP3802E-CK910 identifies ten controller-based Cisco Aironet 3802E access points in a fixed C-domain eco-pack. The E suffix denotes the external-antenna version, so the access points do not complete an RF bill of materials by themselves.

The purchasing gate for this SKU is a destination-specific release packet. Keep the requested country, Cisco compliance lookup date, approver, C-domain evidence and import destination together with the purchase order. Do not translate the C token into a country from memory or reuse approval from a different installation address.

Separate the radio decision from the carton decision. The carton contains ten APs, while antenna pattern, gain, connector, cable loss and mounting location must be approved for each deployment zone. Document any units held as spares and prevent them from being moved to another country without a new regulatory review.

Before production cutover, stage one representative AP against the intended wireless controller and software train. Preserve discovery, join, configuration download, PoE negotiation and multigigabit-link evidence. Apply the approved result to the remaining nine units only after the pilot passes.

Because Cisco has published Aironet 3800 Series lifecycle notices, the release packet should also name the supported controller strategy and replacement family.

Official manufacturer evidence

Cisco Aironet 3800 Series official data sheet. The source supports the Aironet family identity and technical context; destination approval must be checked against Cisco's current compliance resources.