AIR-AP1852I-A-K9 Cisco Aironet 1852i 802.11ac Wave 2 Access Point
- 763 412 7282
- +86 010 69614620
AIR-AP1852I-A-K9 Overview
AIR-AP1852I-A-K9 Non-US A-Domain Record
AIR-AP1852I-A-K9 identifies Cisco's A-domain, controller-managed Aironet 1852i with integrated antennas. Cisco's lifecycle table explicitly marks this A-domain PID as not for the United States, so regional approval is a primary procurement gate.
A-domain channel exclusions
The published plan has 2.412-2.462 GHz, eight channels at 5.180-5.320 GHz, eight at 5.500-5.700 GHz while excluding 5.600-5.640 GHz, and five at 5.745-5.825 GHz. Do not substitute the limited AIR-AP1852I-F-K9 channel set or use this A-domain unit for a US installation.
Controller migration rehearsal
Before replacing an AP, inventory controller release, AP certificates, country code, AP group, WLAN mappings and RRM policy. Stage join and code alignment, then test roaming and restore the prior configuration if the target controller rejects the legacy AP.
Antenna and uplink validation
The 1852i's integrated omni antennas are rated at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz. Verify the enclosure and bracket, then test PoE uplink and AUX/LAG. If powered by 802.3af, AUX and USB are intentionally unavailable.
Lifecycle procurement note
The product ended sale in 2022; service-contract renewal closes 27 July 2026 and all support ends 30 April 2027. Document destination country, entitlement, controller support and the Catalyst 9115AX replacement plan.
Official evidence: Cisco A-domain spectrum, antenna and interface data, Cisco Aironet 1850 installation guide, Cisco non-US A-domain lifecycle row and Cisco regulatory compliance tool.
AIR-AP1852I-A-K9 Specification
| Exact model / SKU | AIR-AP1852I-A-K9 |
| Exact PID | AIR-AP1852I-A-K9 |
| Regional boundary | A regulatory domain; Cisco lifecycle table marks this PID not for USA |
| A-domain 2.4 GHz | 2.412-2.462 GHz; three nonoverlapping channels |
| A-domain 5 GHz | 5.180-5.320 (8); 5.500-5.700 (8, excluding 5.600-5.640); 5.745-5.825 GHz (5) |
| Radio | 2.4 GHz 3x4:3; 5 GHz 4x4:4 Wave 2 |
| Integrated antenna | 3 dBi at 2.4 GHz; 5 dBi at 5 GHz |
| Network interfaces | PoE Gigabit plus AUX Gigabit for LAG |
| Power constraint | 802.3af disables AUX and USB |
| Controller evidence | Country, certificates, release, AP group, WLAN/RRM, join, roaming and rollback |
| Lifecycle | Service renewal ends 2026-07-27; last support 2027-04-30 |
| Acceptance | Exact A label/serial, non-US destination approval, channel exclusions, PoE/LAG, controller and coverage |
| Source match | AIR-AP1852I-A-K9: exact exact non-US A-domain controller Aironet 1852i, excluded DFS slice, destination-country gate and migration rehearsal verified |
| Official manufacturer reference | Cisco exact Aironet 1850 lifecycle table |
AIR-AP1852I-A-K9 Warranty
 | Product Quotation |  | Condition and Packaging |
 | Technical Support Enquiry |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
AIR-AP1852I-A-K9 FAQ
What is AIR-AP1852I-A-K9?
AIR-AP1852I-A-K9 Cisco Aironet 1852i 802.11ac Wave 2 Access Point is a CISCO Aironet 1850 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What wireless or client capacity is listed for AIR-AP1852I-A-K9?
For AIR-AP1852I-A-K9, the manufacturer specification lists radio as 2.4 GHz 3x4:3; 5 GHz 4x4:4 Wave 2.
What interfaces and ports does AIR-AP1852I-A-K9 provide?
For AIR-AP1852I-A-K9, the manufacturer specification lists network interfaces as PoE Gigabit plus AUX Gigabit for LAG.
What are the power requirements for AIR-AP1852I-A-K9?
For AIR-AP1852I-A-K9, the manufacturer specification lists power constraint as 802.3af disables AUX and USB.
Is AIR-AP1852I-A-K9 available from YYST Global?
Contact YYST Global to confirm availability for AIR-AP1852I-A-K9, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Related products
Related AIR-AP1852I-A-K9
AIR-AP1852I-A-K9C Cisco Aironet 1852i Indoor Access Point
AIR-AP1852I-A-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token A. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.
Cisco AIR-AP1852I-EK9-RF Aironet 1852i Remanufactured Access Point
AIR-AP1852I-EK9-RF is the remanufactured order mapped by Cisco to AIR-AP1852I-E-K9. Cisco identifies this exact order as an 802.11ac Wave 2 access point with internal antennas, 4x4:4SS and the E regulatory domain.
AIR-AP1852I-C-K9 Cisco Aironet 1852i 1.733Gbps Thoughput Access Point
AIR-AP1852I-C-K9 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit fixed-domain K9 order for regulatory-domain token C. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.
AIR-AP1852I-Z-K9 Cisco Aironet 1852i Beamforming Access Point
AIR-AP1852I-Z-K9 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit fixed-domain K9 order for regulatory-domain token Z. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.
AIR-AP1852I-S-K9C Cisco Aironet 1852i 802.11ac 1.70 Gbps Access Point
AIR-AP1852I-S-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token S. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.
AIR-AP1852I-K-K9C Cisco Aironet 1852i Controller-based Access Point
AIR-AP1852I-K-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token K. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.
AIR-AP1852I-K-K9 Cisco Aironet 1852i Controller-based Access Point
AIR-AP1852I-K-K9 is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit fixed-domain K9 order for regulatory-domain token K. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.
AIR-AP1852I-I-K9C Cisco Aironet 1852i Dual-band Access Point
AIR-AP1852I-I-K9C is a 1852i indoor access point with integrated omnidirectional antennas, supplied as a single-unit configurable K9C order for regulatory-domain token I. Verify destination approval, controller software, PoE mode, exact quantity, antenna or mounting bill of materials and the 30 April 2027 support cutoff before purchase.