AIR-ANT5160V-R - Cisco Aironet 6-dBi Omnidirectional Antenna
- 763 412 7282
- +86 010 69614620
AIR-ANT5160V-R Overview
AIR-ANT5160V-R Rugged 5 GHz Omni
AIR-ANT5160V-R is Cisco's 5 GHz, 6 dBi omnidirectional collinear antenna for large rooms, vaulted spaces or outdoor mounting. Its documented range is 5150-5875 MHz.
Coverage geometry
Cisco specifies an omnidirectional H-plane and 17-degree E-plane beamwidth. The compressed elevation pattern requires mounting-height and tilt analysis; it is not interchangeable with a low-gain ceiling antenna.
Feed and connector
The antenna terminates in an RP-TNC male connector after a 36-inch plenum-rated cable. Inspect cable continuity and connector condition, and include any extension loss in the 5 GHz link budget.
Mounting and environment
Cisco supports mast, I-beam and suspended-ceiling mounting and lists -30 to 70 C operation plus 125 mph wind rating. For outdoor use, verify grounding, drain orientation, sealing and lightning protection.
Radio compatibility
The guide permits compatible 5 GHz Cisco Aironet radios using RP-TNC. Confirm the exact AP antenna approval and radio-chain count; this single-band antenna does not supply 2.4 GHz coverage.
Official source: Cisco AIR-ANT5160V-R specifications and mounting guide.
AIR-ANT5160V-R Specification
| Exact model / SKU | AIR-ANT5160V-R |
| Antenna form | Rugged 5 GHz omnidirectional collinear antenna |
| Frequency range | 5150-5875 MHz |
| Peak gain | 6 dBi |
| Pattern | Omnidirectional H-plane; 17-degree E-plane |
| Cable and connector | 36 in plenum-rated lead; RP-TNC male |
| Mounting | Mast, I-beam or suspended-ceiling cross member |
| Environment | -30 to 70 C; 125 mph wind rating |
| Receiving gate | Inspect cable, RP-TNC, bracket set, radome, drain and grounding parts |
| Source match | AIR-ANT5160V-R: exact Cisco antenna frequency, gain, pattern, connector, environment and procurement boundary verified |
| Official manufacturer reference | Cisco AIR-ANT5160V-R official guide |
AIR-ANT5160V-R Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
AIR-ANT5160V-R FAQ
What is AIR-ANT5160V-R used for?
AIR-ANT5160V-R - Cisco Aironet 6-dBi Omnidirectional Antenna is a CISCO accessory or component in the Antenna 2.4 5 5.8 GHz category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with AIR-ANT5160V-R?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with AIR-ANT5160V-R?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of AIR-ANT5160V-R?
Please request a quote for AIR-ANT5160V-R. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products
Related AIR-ANT5160V-R
Cisco AIR-ANT5160NP-R Antenna, 5 GHz/6 dBi/802.11n
AIR-ANT5160NP-R is a Cisco three-element MIMO patch for 5.15 to 5.85 GHz, rated 6 dBi and using RP-TNC with 3-foot plenum-rated cable. It is an antenna only.
Cisco AIR-ANT5135SDW-R Indoor 5 GHz 3.5 dBi Omnidirectional Antenna
AIR-ANT5135SDW-R is a short indoor 5 GHz antenna with 3.5 dBi peak gain and an RP-TNC jack. It is not an access point or WLAN controller.
Cisco AIR-ANT5195P-R — 5 GHz 9.5 dBi patch antenna
Cisco AIR-ANT5195P-R is a 9.5 dBi, vertically polarized 2 × 2 patch array for 5150–5850 MHz. Its attached lead ends in an RP-TNC male connector.
Cisco AIR-ANT5114P-N — 4.9–5.85 GHz directional patch array
AIR-ANT5114P-N is Cisco's directional 2 × 2 patch-array antenna with a female N connector. Gain is 13 dBi from 4900–5470 MHz and 14 dBi from 5470–5850 MHz.
Cisco AIR-ANT5135D-R — 5 GHz articulated dipole
AIR-ANT5135D-R is Cisco's black 3.5 dBi articulated dipole for 5150–5850 MHz. Its horizontal radiation pattern is omnidirectional; this is not an outdoor directional panel.
Cisco AIR-ANT5135DB-R 5-GHz 3.5-dBi Articulated Dipole Antenna
Cisco AIR-ANT5135DB-R is a black articulated dipole antenna for the 5-GHz band, with 3.5-dBi nominal gain and an RP-TNC connector. It is an antenna component, not a complete wireless access point.
AIR-ANT5170P-R - Cisco Aironet 7-dBi Diversity Patch Antenna
AIR-ANT5170P-R is a Cisco diversity patch antenna for 5.15 to 5.85 GHz, rated 7 dBi and using RP-TNC with 36-inch plenum-rated cable. It is an antenna only.
Cisco AIR-ANT5145V-R, 5GHz, 4.5dBi, RP-TNC, Antenna
AIR-ANT5145V-R is a Cisco low-profile omnidirectional antenna for 5 GHz, rated 4.5 dBi and using RP-TNC. It is an antenna only.