Huawei S2700-26TP-PWR-EI 24-Port PoE+ Access Switch

S2700-26TP-PWR-EI Modular-Power PoE Switch

S2700-26TP-PWR-EI is a Huawei S2700-EI PoE access switch with 24 10/100BASE-TX powered ports and two combo uplinks. Each combo position represents one forwarding interface shared by its electrical and optical connectors, so both sides cannot carry independent links.

Choose the power modules from the load

Huawei documents two power slots accepting 250 W or 500 W AC PoE modules. One 250 W module makes 123.2 W available to powered devices, while one 500 W module provides 369.6 W; paired modules raise the available budget to 246.4 W or 739.2 W respectively.

Do not assume stack capability

This exact model is one of Huawei's documented S2700-EI non-stacking exceptions. A design that needs multiple coordinated switches must use an upstream topology or a different verified stack-capable model rather than assigning stacking duties to the combo uplinks.

Procurement controls

State the required module quantity and wattage on the purchase order. Confirm compatible Huawei optics for the selected combo mode, the regional AC cords, fan arrangement and software release; a bare chassis description is not enough to establish the delivered PoE capacity.

Acceptance

Verify part number 02352336, both power slots, the actual module labels, all required access links, representative PoE loads and the selected electrical or optical mode of each combo interface.

Official evidence: Huawei S2700-26TP-PWR-EI hardware description and Huawei stacking requirements.