HUAWEI R230D R200 Series Access Points

R230D is a HUAWEI wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.

YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.

Product name: R230D Huawei R200 Series Indoor 802.11ac Wave 1 2x2 MIMO Access Point. Category: Huawei R200 Series Access Points. Condition: New Factory Sealed.

PoE port surge protection	PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 4kV (1.2/50 us, 42 ohm), B criterion FE: Common mode (eight pairs of cables-GND), 4kV (1.2/50 us, 42 ohm), B criterion
Ingress protection	IP20
Atmospheric pressure	53~106Kpa ETSI 300 019-2-3
Ground/floating ground	Floating ground
Operating temperature	Operating temperature: 0~40℃ Storage temperature: -40~70℃
Altitude	The device works properly if the altitude is between -60 m and 5000 m; If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m.
Humidity	5%~95%
FCC	Supported
Wi-Fi alliance	Supported
Certification of Radio Association of China	CMIIT ID;
Safety certification	EN 60950-1
Environment certification	RoHS
MIMO	2×2Multi-input Multi-output, for example, 4*4:4 indicates that 4SU-4MU is supported.
Wi-Fi standard	802.11b/g/n802.11a/n/ac
Antenna gain (Typical)	2.4G:3dBi 5G:4dBi
Radio power (Max)	2.4G: 20dBm(Max) 5G: 18dBm(Max) (note: this is MIMO total radio power, the same as: 2.4G: 17dBm/chain(Max) 5G : 15dBm/chain(Max))
Radio port/built-in antenna	Built-in antenna, Dual bands, 2×2 MIMO
Power consumption of the device	5.1W
Ethernet ports	FE(RJ45) x 1, 100base-T, 10M/100M auto negotiation speed
Weight (kg)	0.1kg
Dimensions (W x D x H) (mm)	86*120*26 (note: without hump on the backside)
LED indicator	One two-color LED indicator
AP PoE input	802.3af