HUAWEI CE6851-48S6Q-HI CE6800 Series Switches

CE6851-48S6Q-HI is a HUAWEI enterprise network switch listed by YYST Global for campus switching, data center expansion, spare replacement and network refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.

YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.

Product name: Huawei CE6851-48S6Q-HI Switch. Category: Huawei CE6800 Series Switches. Condition: New Factory Sealed.

Slot

• Power supply slot

  The CloudEngine 8800, 7800, 6800, and 5800 series switches (except the CE8850-64CQ-EI) have two power supply slots, in which power modules can be installed to provide power to the chassis. A chassis can have one or two power modules. Double power modules can provide higher reliability.

  The CloudEngine 8800, 7800, 6800, and 5800 series switches (except the CE8850-64CQ-EI) support double power modules (1+1 backup).

  • When both power modules are working properly, they equally provide power for a chassis.
  • When one power module fails, the other one provides all power required for a chassis.
  All power modules are hot swappable.

• Fan slot

  The CloudEngine 8800, 7800, 6800, and 5800 series switches (except the CE8850-64CQ-EI, CE6863-48S6CQ, CE6881-48S6CQ, CE6820-48S6CQ, CE6820-48S6CQ-A, CE6863-48S6CQ-K, CE6881-48S6CQ-K, CE6881E-48S6CQ and CE6857-48S6CQ-EI) have two fan slots, in which fan modules can be installed to cool the chassis, ensuring efficient heat dissipation and system stability. A chassis must have two working fan modules to ensure normal operating.

  All fan modules are hot swappable.

Airflow

The cooling systems of the CloudEngine 8800, 7800, 6800, and 5800 series switches have front-to-back or back-to-front airflow depending on the airflow direction of the power modules and fan modules used. The airflow direction of the power modules and fan modules required on the CloudEngine 8800, 7800, 6800, and 5800 series switches depends on how the switches are installed in cabinets. Typically, cabinets in a data center have cold air flowing in from the front and hot air exhausted from the back. If CloudEngine 8800, 7800, 6800, and 5800 series switches are installed with the power supply side facing the front, you are advised to use fan modules and power modules with front-to-back airflow in the switches.

• Front-to-back airflow: The power modules and fan modules using front-to-back airflow are marked  or . Air flows into the chassis from the power supply side and flows out from the port side, as shown in Figure 3-68 (CE5800 as an example).
• Back-to-front airflow: The power modules and fan modules using back-to-front airflow are marked  or . Air flows into the chassis from the port side and flows out from the power supply side, as shown in Figure 3-69 (CE5800 as an example).

• When the power module and fan module use forcible heat dissipation, they must use the same airflow method. For example, if the power module with back-to-front airflow is used, the fan module with back-to-front airflow must be used.

Figure 3-68 Front-to-back airflow (air flows out from the port side)

Figure 3-69 Back-to-front airflow (air flows in from the port side)

Indicators

The CE6851-48S6Q-HI does not have a mode switch button and the STAT/SPEED/STACK mode indicator. The downlink service port indicators of the CE6851-48S6Q-HI are 10GE optical port indicators, and other indicators on the CE6851-48S6Q-HI are the same as those on the CE6850-48T4Q-EI. The CE6850-48T4Q-EI. is used as an example here to describe the indicators.

Ports

10GE SFP+ Ethernet Optical Port

A 10GE SFP+ Ethernet optical port supports auto-sensing to 1 Gbit/s, and can receive and send services at a rate of 1000 Mbit/s or 10 Gbit/s. Table 3-149 describes the attributes of a 10GE SFP+ Ethernet optical port.

Table 3-149 Attributes of a 10GE SFP+ Ethernet optical port

40GE QSFP+ Ethernet Optical Port

A 40GE QSFP+ Ethernet optical port receives and sends services at the rate of 40 Gbit/s. If a 40GE QSFP+ Ethernet optical port is split into four 10GE ports, it must use 1-to-4 QSFP+ optical modules and optical fibers or 1-to-4 QSFP+ cables. Table 3-150 describes the attributes of a 40GE QSFP+ Ethernet optical port.

Table 3-150 Attributes of a 40GE QSFP+ Ethernet optical port

Console Port

The console port is connected to a console for onsite configuration. The port must use a console cable. Table 3-151 describes the attributes of the console port.

Table 3-151 Attributes of the console port

ETH Management Port (RJ45)

The ETH management port (RJ45) of a switch is connected to the network port of a configuration terminal or network management workstation to set up the onsite or remote configuration environment. The ETH management port (RJ45) uses a Category 5 or higher category cable. Table 3-152 describes the attributes of the ETH management port (RJ45).

Table 3-152 Attributes of the ETH management port (RJ45)

USB Port

A USB flash drive can be connected to the USB port for log backup, system software backup and uploading, or USB-based deployment.

Specifications

Official manufacturer specification reference

Ordering Information

Ordering information is subject to change without notice in the case of product upgrades. Ordering information provided in this manual is for reference only. To obtain latest ordering information, contact Huawei switch distributors or local Huawei representative office.

Table 3-154 provides the ordering information.

Table 3-154 Ordering information