AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point
AP2051DN-E
Price:US $300.00
HUAWEI AP2051DN-E AP2000 Series Access Points product image
HUAWEI AP2051DN-E AP2000 Series Access Points product image

HUAWEI AP2051DN-E AP2000 Series Access Points

AP2051DN-E

AP2051DN-E HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support.

New Factory Sealed
US$ 300.00
mastercard paypal t-t visa
AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point
Engineer Team Support
7*24h Online
  • 763 412 7282
  • +86 010 69614620

AP2051DN-E Buying Guide

AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point is listed by YYST Global for buyers looking for HUAWEI Huawei AP2000 Series Access Points. AP2051DN-E HUAWEI wireless networking hardware for campus WLAN projects. Contact YYST Global for stock, lead time and quote support. The listed condition is New Factory Sealed. The reference price is US$ 300.00. Contact our sales team to confirm stock, lead time, warranty and configuration before ordering.

  • Model: AP2051DN-E
  • Brand: HUAWEI
  • Category: Huawei AP2000 Series Access Points
  • Condition: New Factory Sealed
  • Reference price: US$ 300.00

AP2051DN-E Overview

AP2051DN-E is a HUAWEI wireless networking hardware listed by YYST Global for campus WLAN expansion, controller replacement, access point rollout and wireless refresh projects. This page is intended for buyers comparing replacement parts, project supply, spare inventory and quote options.

YYST Global helps enterprise customers confirm model information, product category, condition, availability and sourcing route before purchase. For time-sensitive projects, send the model number and required quantity so our sales team can check stock, lead time and compatible alternatives.

Product name: AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point. Category: Huawei AP2000 Series Access Points. Condition: New Factory Sealed.

AP2051DN-E Specification

PoE port protectionPoE interface:
Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion;
Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion
Ingress protection levelIP20
Atmospheric pressure53~106Kpa ETSI 300 019-2-3
Ground/Floating groundFloating ground
AltitudeThe device works properly if the altitude is between -60 m and 5000 m;
If the altitude is higher than 1800 m, the temperature decreases by 1℃ every time the altitude increases by 300 m.
Temperature rangeOperating temperature: 0~40℃
Storage temperature: -40~70℃
Humidity range5%~95%
CE certificationCE(Rohs, Reach, WEEE)
Wi-Fi AllianceSupported
Certificate in ChinaCMIIT ID;CCC;/Certified by the Radio Regulatory Commission/Network Access License of the Ministry of Industry and Information Technology
Other certifications (IC/C-Tick)RCM; BT
Safety regulationEN 60950-1
Environmental protectionRoHS
MIMO2x2:2Multiple-input multiple-output (MIMO). For example, 4x4:4 indicates 4SU and 4MU.
Wi-Fi standard802.11b/g/n
802.11a/n/ac/ac wave2
Antenna gain2.4G:3dB
5G:4dB(for claim)
Radio power (maximum)2.4G: 23dBm(Max)
5G: 23dBm(Max)
(note: this is MIMO total radio power, the same as:
2.4G: 20dBm/chain(Max)
5G : 20dBm/chain)(Max)
RF ports and built-in antennasBuilt-in smart antenna, Dual bands, 2x2 MIMO
Device power consumption11.5 W (not including USB or PoE out)14.5 W (including USB of 2.5 W)
Ethernet interface7xRJ45:
1) In-wall: 1xGE (RJ45, PoE In, 10M/100M/1000M auto, b.1x Pass-Through(RJ45));
2) outside wall: 4xGE (RJ45, 10M/100M/1000M auto with a port PoE out); b.1x Pass-Through(RJ45)
Weight (kg)0.25kg
Dimensions (H x W x D, in mm)86*150*32.5 (note: without hump on the backside)
LED indicatorOne two-color LED indicator
Preferential Selection of Power Supply (DC Input/PoE Input When Both Power Supply Modes Exist)No priorityNote:
1) Hot backup is not supported between DC and PoE inputs.
2) When the two power supply modes coexist, the DC input range must be 12 V±5%.
1. Differentiate priorities and connect to the power supply with a higher priority.
2. The input source with a higher voltage is used as the main power supply regardless of the priority. Both the input source and the input source may supply power due to the voltage difference of the power adapter, the output voltage difference of the switch, the length of the network cable, and the impedance of the network cable.
3. Hot backup is supported. The system does not restart when one of them is removed.
4. Hot backup is not supported. If one of them is removed, the device may restart.
DC input45.6V-57V
Power supply (input) for PoE outThe PoE out has the same input with the system Power (PoE_IN or 48V DC power supply)
PoE input802.3af/at (only supported by in-wall GE0 port)
Exact product modelAP2051DN-E
Product familyHuawei AirEngine/AP wireless access point
Official Huawei documentationHuawei Enterprise Support results for AP2051DN-E
Specification validationMatch the exact order code, suffix, region, power option, software version and required licenses against Huawei documentation before purchase.

AP2051DN-E Warranty

Low price guarantee

Low Price Guarantee
Customers can get high quality products at wholesale prices

Product quality assurance

Quality Assurance
All products sold are original genuine goods, new packaging unopened

Return support

100% Money Back Guarantee
If your return meets our relevant standards, you can contact our customer service team to exchange or return any product that you bought from us

Refund policy

Commodity Refund Guarantee
For equipment purchased from us, please contact our customer service team for return and replacement services

Global shipping services

Diversified and Flexible Transportation Services
Cargo carriers include FedEx, DHL, UPS, Aramex, TNT, EMS

Warranty policy

Standard Policy
1 Year

AP2051DN-E FAQ

What is AP2051DN-E?

AP2051DN-E Huawei AP2000 Series 802.11ac Wave 2 Dual-band Access Point is a HUAWEI Huawei AP2000 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.

What is the poe port protection of AP2051DN-E?

The listed poe port protection for AP2051DN-E is PoE interface: Differential mode (48 V-RTN), 0.5 kV (1.2/50 us, 42 ohm), B criterion; Common mode (eight pairs of cables-GND), 6 kV (1.2/50 us, 42 ohm), B criterion. Confirm the exact SKU and hardware revision against the project requirement before ordering.

What is the ingress protection level of AP2051DN-E?

The listed ingress protection level for AP2051DN-E is IP20. Confirm the exact SKU and hardware revision against the project requirement before ordering.

Is AP2051DN-E available from YYST Global?

YYST Global can help check availability, lead time and configuration for AP2051DN-E. Contact the sales team before ordering to confirm current stock.

What is the price of AP2051DN-E?

The current reference price for AP2051DN-E is US$ 300.00. Final pricing can change based on stock, quantity, configuration and delivery destination.

Related products

Related AP2051DN-E

View More