X440-G2-48t-10GE4-DC

Create two separate media maps for the front and rear

On the front, this model has forty-eight 10/100/1000BASE-T RJ45 data ports and four unpopulated 1GBASE-X SFP choices. The manufacturer drawing groups positions 45 through 48 under Shared Ports. Copper and fiber at each shared position are alternatives rather than additional simultaneous links. The rear is a different group: four optical positions numbered 49 through 52, alongside two copper combination choices at 51 and 52. Those two rear copper sockets must not be counted on top of four independent rear optical links. Prepare a link-by-link media schedule across both panels so a fiber replacement or copper uplink order does not silently overstate usable connectivity.

Check duplex groups against the endpoints being retained

The exact 48t DC port reference allows both half and full duplex on copper ports 1 through 16 and 25 through 40. The other front copper ports, 17 through 24 and 41 through 48, are full-duplex only. This split matters when moving an older endpoint that requires half-duplex communication: an arbitrary spare socket is not equivalent to one in an approved group. Match endpoint requirements and intended shared-fiber positions before copying the configuration. The published groups describe port capability, not the actual negotiated mode or cabling of an offered switch.

Resolve rear speed licenses before allocating stacking links

The rear optical ports support 1Gb Ethernet, with 10Gb data operation requiring an additional upgrade license. Two optical ports can instead provide stacking, leaving two Ethernet uplinks; 10Gb data on the non-stacking pair still needs the relevant license. The manufacturer also identifies two rear copper combination ports upgradeable from 1Gb to 10Gb Ethernet. Their shared positions 51 and 52 require a deliberate optical-versus-copper choice. Confirm the applicable software rights, supported optics or copper cabling and exact topology for the offered equipment. A 10GE4 suffix describes upgrade-capable hardware and does not establish that a particular used or stocked unit includes every requested entitlement.

Plan for the DC terminal panel and deeper chassis

The exact rear drawing labels the DC terminal panel −48 V DC / 1.45 A and shows a grounding lug plus a separate redundant power input. These are manufacturer illustration markings, not a measured load or an independently verified rating for the offered unit. The source does not establish the complete input tolerance here. Obtain the actual equipment label, approved power-system requirements and manufacturer installation instructions before energizing it; a compatible redundancy supply and cable are separate quotation items. Published unpackaged dimensions are 4.4 cm high, 44.15 cm wide and 36.86 cm deep, with a 5.08 kg chassis weight. Provide clearance for DC wiring and rear data cables. Local access uses a dedicated Gigabit management port and RJ45 console; the front USB 2.0 function requires ExtremeXOS 22.2 or later. Installed software, environmental suitability, accessories and current support remain unit-specific checks.

Document/Firmware Download

• Exact 48t DC duplex groups and front/rear port roles
• X440-G2 manufacturer variant context
• Exact unpackaged DC chassis dimensions and weight
• Exact rear drawing: shared copper/optical positions and DC label

The displayed front drawing is official documentation for this exact model, not a photograph of the quoted stock. No stock availability, lifecycle date, full DC input tolerance or software entitlement is inferred from these references.