X440-G2-24x-10GE4

Count the shared copper and fiber choices as the same connections

The exact 24x-10GE4 front-panel drawing labels twenty-four 1GBASE-X SFP positions and four 10/100/1000BASE-T copper sockets. Its highlighted Shared Ports legend connects the copper choices to optical positions 21 through 24. These are four combination connections, not four extra simultaneous front-panel links. For replacement planning, record whether each shared position uses copper or fiber, then count that position once. The separate Ethernet management socket does not increase the data-port total. This distinction prevents a generic 28-front-port interpretation of the physical connector count.

Budget rear optical capacity around data licenses and stack links

A further four unpopulated optical positions are documented on the rear of X440-G2-24x-10GE4. Each can be used for 1Gb Ethernet, while 10Gb data operation requires an additional upgrade license. The guide also allows two of those positions to become stacking links, leaving two Ethernet uplinks. If the remaining data links must run at 10Gb, their license requirement continues to apply. Ask for the requested port role, modules and actual entitlement together rather than assuming that four SFP+ markings mean four licensed 10Gb data links remain available after a stack is formed.

Specify the external redundant supply separately from the fixed AC input

The rear-panel reference places the grounding lug, redundant power input and AC socket alongside the optical group. The fixed internal supply specifications are 100–240 VAC and 50–60 Hz. For the family’s non-PoE configuration, redundant operation requires a compatible external RPS; the connector alone is not another included power supply. Verify the connecting cable, regional cord and supplied mounting parts in the same quotation. This page does not assign PoE capabilities or a powered-device budget to the four copper combination sockets.

Retain independent management access during a fiber migration

Local administration is provided by a dedicated 10/100/1000BASE-T Ethernet management port and an RJ45 console. The USB 2.0 interface is operational on ExtremeXOS 22.2 or later, so the actual installed image and recovery procedure should be recorded before moving links. The standard-temperature family range applicable to 24x is 0–50°C; the 0–60°C exception documented for other GE4 variants is not transferred here. The unpackaged chassis measures 4.4 cm high, 44.15 cm wide and 25.43 cm deep, with a published 3.77 kg weight. Use the chassis dimensions for the installation and separately verify freight packaging and accessories.

Document/Firmware Download

• Exact 24x shared front ports and licensed rear optical modes
• X440-G2 configuration and temperature boundaries
• Manufacturer chassis dimensions, weight and AC specifications

The front-panel picture is the manufacturer’s exact-model drawing, not a stock photograph. Confirm the actual installed software, licenses, accessories, availability and current support status for the offered item; these references establish hardware facts rather than a current supply commitment.