Cisco C9200L-24PXG-4X-E Catalyst 9200 Series Switches

Eight multigigabit ports within a twenty-four-port switch

C9200L-24PXG-4X-E is the Cisco Catalyst 9200L order with Network Essentials, 24 PoE+ downlinks and four fixed 1/10-Gbps uplinks. Only eight downlinks support multigigabit speeds up to 10 Gbps; the other sixteen run at up to 1 Gbps. That division matters when assigning access points or other higher-bandwidth endpoints.

Keep fixed uplinks separate from access ports

The four SFP+ uplinks are separate from the 24 copper downlinks. The 4X model uses fixed 1/10-Gbps uplinks; it is not the 2Y order with two 25-Gbps uplinks. Specify the complete suffix when matching a switch to an existing fiber design, and verify the supported optics for the actual links.

Supply rating and available PoE are different quantities

Cisco lists PWR-C5-600WAC for this model, with 370 W of available PoE using one listed AC supply and 740 W with two. Size endpoint allocations against the applicable PoE budget rather than the power-supply label. As a planning example, 24 allocations of 15 W total 360 W, leaving 10 W against a 370 W budget; this is an allocation calculation, not a claim about measured endpoint consumption.

Confirm the E software identity and the supplied options

The exact -E order corresponds to Network Essentials; the -A order corresponds to Network Advantage. Confirm software rights and any subscription term for the actual equipment separately. The chassis specification also does not prove that a second supply, stacking accessories or optical transceivers are present in the offered package.

Cisco exact ordering, port and PoE tables