C9130AXI-EWC-D is the internal-antenna Catalyst 9130 AP order with Embedded Wireless Controller. Cisco currently recommends the D domain for the C9130AXI platform in India. The AP Channels recommendation expressly does not establish compliance status; validate the exact ordered PID and intended country in the Product Approvals Database before deployment.
EWC runs the wireless controller function on the access point. The lifecycle bulletin lists this exact EWC-D PID and says affected APs can be converted to lightweight/CAPWAP operation. When evaluating that path, check the controller and AP release compatibility and use the hardware lifecycle for the converted AP. Do not assume a quotation includes a physical wireless controller or all required software rights.
The 9130AXI platform uses integrated antennas and a single multigigabit RJ-45 Ethernet port supporting 100 Mbps, 1 Gbps, 2.5 Gbps and 5 Gbps. It is an indoor model, rather than an AXE model requiring an external antenna arrangement. A 5-Gbps interface is a link capability, not a measured client throughput or WAN speed guarantee.
The C9130AXI data sheet lists 802.3af operation with 1x1 on both bands, a 1G link and no USB, instead of full-radio operation. It also says ambient temperature above 40 degrees Celsius causes the 5-GHz radio to shift to 4x4 and Ethernet to 1G while USB remains enabled. Validate site temperature and negotiated power rather than carrying over full-power capacity figures.
Cisco stopped selling this EWC order on November 29, 2024. The last applicable EWC support date is November 30, 2029 under eligible active-contract or warranty terms. The new service-attachment cutoff was November 29, 2025. A resale listing does not prove that a new Cisco support contract can now be attached; confirm entitlement and the offered unit before ordering.
Cisco Catalyst 9130 data sheet · Exact EWC order lifecycle bulletin · Cisco geographic PID recommendations
| Exact D-domain PID | C9130AXI-EWC-D; internal-antenna EWC order |
| Country selection reference | India: D domain for C9130AXI; separate PID approval required |
| Ethernet interface | One RJ-45 multigigabit uplink: 100/1000/2500/5000 Mbps |
| 802.3af operation | 1x1 on 2.4/5 GHz, 1G link, USB disabled |
| Above-40C operating behavior | 5-GHz radio 4x4; Ethernet 1G; USB remains enabled |
| EWC sales/support milestones | End of sale November 29, 2024; last applicable support November 30, 2029 |
| New service attachment cutoff | November 29, 2025; confirm current entitlement |
| Conversion boundary | CAPWAP conversion supported per bulletin; AP hardware timeline applies |
Product Quotation | ![]() | Condition and Packaging | |
![]() | Technical Support Enquiry | Returns and Replacement | |
Shipping Arrangements | ![]() | Warranty Terms |
C9130AXI-EWC-D Cisco Catalyst 9130AX Series APs Dual-band, 802.11ax is a CISCO Catalyst 9130 Series Access Points product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
For C9130AXI-EWC-D, the manufacturer specification lists ethernet interface as One RJ-45 multigigabit uplink: 100/1000/2500/5000 Mbps.
Contact YYST Global to confirm availability for C9130AXI-EWC-D, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
Please request a quote for C9130AXI-EWC-D. Final pricing depends on stock, quantity, configuration and delivery destination.
Related products

C9130AXI-EWC-G is a Cisco indoor Wi-Fi 6 AP with internal antennas and Embedded Wireless Controller. Its G regulatory-domain platform is recommended for Pakistan; approval must be checked separately. The exact EWC order is end of sale, with support subject to eligible terms.

C9130AXI-EWC-Q is a Japan-listed internal-antenna EWC access point. Review Q-domain W56 requirements, controller mode and the EWC support timeline before deployment.

C9130AXI-EWC-T is an internal-antenna C9130AX access point with an Embedded Wireless Controller order. Verify country approval and the EWC lifecycle before deployment.

C9130AXI-EWC-E is the domain-E Cisco Catalyst 9130 EWC Wi-Fi 6 access point. The EWC PID includes embedded-controller capability; define controller ownership, backup and failover responsibilities before deployment.

C9130AXI-EWC-H is the domain-H Cisco Catalyst 9130 EWC Wi-Fi 6 access point. The EWC PID includes embedded-controller capability; define controller ownership, backup and failover responsibilities before deployment.

C9130AXI-EWC-A is the domain-A Cisco Catalyst 9130 EWC Wi-Fi 6 access point. The EWC PID includes embedded-controller capability; define controller ownership, backup and failover responsibilities before deployment.

C9130AXI-EWC-B is the domain-B Cisco Catalyst 9130 EWC Wi-Fi 6 access point. The EWC PID includes embedded-controller capability; define controller ownership, backup and failover responsibilities before deployment.

C9130AXI-EWC-F is the domain-F Cisco Catalyst 9130 EWC Wi-Fi 6 access point. The EWC PID includes embedded-controller capability; define controller ownership, backup and failover responsibilities before deployment.