CISCO ASR-9010-DOOR ASR 9000 Series

ASR-9010-DOOR Ten-Slot Front Door Kit

ASR-9010-DOOR is Cisco's ten-slot ASR 9010 door kit. Cisco lists the PID separately from the ASR 9010 chassis, rack kits and air filter, and the Cisco Refresh catalog describes it as a door with lock.

Match the 9010 enclosure

The ASR 9010 has two RSP slots and eight line-card slots in a 21RU chassis. Its door dimensions and mounting geometry are not the same procurement item as the six-slot ASR-9006-DOOR. Confirm the chassis identity plate and existing bracket condition before ordering.

This is an external mechanical spare

No RSP, switch fabric, line card, transceiver, fan tray, power entry module, power module or software is supplied by this PID. The air filter and two-/four-post rack hardware are also separate Cisco items. Avoid quoting the door kit as a complete ASR 9010 system or a performance upgrade.

Acceptance emphasizes fit and service access

Inspect the frame, lock cylinder, keys, hinge points, latch and attachment hardware. Trial-fit the assembly without forcing the latch, and ensure the cable-management area remains clear. Record missing brackets or shipping damage before the component reaches the installation site.

Cooling remains a system check

The ASR 9010 uses front-to-rear cooling and requires both fan trays for normal operation. After fitting the door, verify airflow clearance, alarms and access to replaceable modules. The door itself neither filters inlet air nor restores a failed cooling component.

Cisco's technical specifications identify the ASR 9010 chassis dimensions and the additional width/depth contributed by rack flanges, cable management and front cover; preserve those clearances in the rack plan.

Official evidence: Cisco IOS XR supported-hardware table, Cisco ASR 9000 hardware installation guide, Cisco ASR 9006/9010 physical overview and Cisco Refresh exact accessory catalog and Cisco ASR 9010 physical specifications.