CISCO AIRAP1852I-HK910C Aironet 1850 Series Access Points

AIR-AP1852I-HK910C exact order identity

AIR-AP1852I-HK910C is a 1852i indoor access point with integrated omnidirectional antennas in the Cisco Aironet 1850 Series. This exact SKU combines regulatory-domain token H with a configurable K910C ten-access-point pack. The platform is a dual-band 802.11ac Wave 2 access point with four 5 GHz spatial streams in single-user operation and three in multiuser operation.

Antenna and environmental boundary

Cisco rates the internal antenna system at 3 dBi for 2.4 GHz and 5 dBi for 5 GHz, with 360-degree horizontal beamwidth. No external antenna is selected by this SKU. Preserve enclosure orientation, bracket, mounting height and post-install coverage because placement determines how the integrated pattern is used.

Order and controller boundary

K910C combines a configurable order with ten physical access points. Domain selection and physical quantity are independent acceptance gates. Preserve the configured-domain evidence at carton level and create ten serial-level rows. Quarantine partial, mixed-domain or unconfigured receipts.

H regulatory-domain evidence

Cisco lists this profile as 2.4 GHz channels 1-13; 5 GHz blocks at 5.150-5.350 and 5.745-5.825 GHz. The H profile starts its lower 5 GHz range at 5.150 GHz and also provides a separated upper block. That lower boundary distinguishes it from nearby domain profiles. Capture the controller's complete lower-range and upper-range channel output. Match it to the approved H-domain destination and investigate a template that begins at a different lower boundary.

Procurement inference: because the lower group begins below the more common 5.180 GHz boundary, country approval and controller output must be read together. Do not infer that every channel inside the numerical span is available at the destination. Preserve the exact enabled-channel export and associate post-install measurements with it so later troubleshooting can distinguish a regulatory change from an RF-performance change.

Power and interface boundary

The 1852 provides a PoE Gigabit uplink and a Gigabit AUX port for link aggregation. Cisco states that 802.3af disables AUX and USB on both antenna forms and reduces the 1852e 2.4 GHz radio from 3x4 to 2x3. Record negotiated power before promising the complete interface and radio state.

Deployment evidence worksheet

Power-state acceptance

Measure power after the access point has joined its controller and the planned radios and services are active. Record switch model, port, negotiated power level, LLDP result and any reduced-capability warning. An idle boot result is not sufficient evidence for the deployed power budget. If an injector is proposed, verify its supported use and include its exact identity in the maintained bill of materials rather than treating it as an unspecified accessory. The 1852 draws up to 20.9 W; 802.3af also disables AUX Ethernet and USB, while the external-antenna 1852e reduces its 2.4 GHz radio from 3x4 to 2x3.

Survey-to-install reconciliation

Attach the approved RF survey location, mounting height, orientation, expected client density, channel width and neighboring-radio assumptions to the order. After installation, compare measured coverage and interference with that design. If ceiling construction, antenna placement or obstructions changed, document the deviation and repeat the affected measurements. This provides a site-specific acceptance reason for the exact unit instead of relying on a family data sheet alone. Relate the survey result to the 1852's 4x4:4 single-user and 4x4:3 multiuser 5 GHz design rather than treating the published 1.7 Gbps PHY rate as measured site throughput.

Country approval retention

Save the Cisco compliance lookup result, lookup date, deployment country, approved regulatory token and reviewer. If the destination changes, stop and repeat the approval rather than moving the unit on the strength of an earlier purchase. Compare the controller country setting and available channels with the retained evidence. Regulatory eligibility is a deployment condition and cannot be inferred from connector fit, stock location or a similar-looking part number. Cisco explicitly makes the customer responsible for country approval; retain the lookup alongside the 1852's controller country and enabled-channel evidence.

Quotation substitution gate

Compare antenna form, regulatory token, configuration suffix, pack quantity and complete Cisco part number on the authorized quotation. Treat any changed token as a substitution that requires a new technical and regulatory review. Procurement should not accept a nearby Aironet 2802 line merely because the family name matches. Preserve the approved line, received label and exception decision so the final asset can be traced to the exact order reviewed here. A K9, K9C, K910, K910C, antenna-form or regulatory-token change is a different 1852 procurement line and must not be accepted as a cosmetic substitution.

Controlled spare policy

If purchased as a spare, name the protected site population, compatible controller image, storage location, storage conditions and periodic power-on test. Confirm that regulatory token, antenna architecture and mounting parts match the population it protects. Set a final-use review date. A stored unit can become unsuitable while untouched because controller software, country approval, certificates or network architecture may change. A spare 1852 must be checked against the protected controller release, certificate behavior, regulatory domain, antenna form and 2027 support cutoff before assignment.

Authentication path test

Commission representative clients through association, authentication, address assignment, DNS and application reachability. Preserve the identity policy used, test client type, result and relevant controller logs. An access point that joins its controller has not yet demonstrated the user path. Repeat the test after any controller, certificate or authentication-service change and retain failures separately from RF or switch-port evidence. Test the complete user path after the 1852 joins; the controller relationship alone does not prove client authentication, DHCP, DNS or application reachability.

Replacement dependency map

Map this unit to controller, licenses, authentication services, switch power, cable, bracket, antenna design and monitoring objects. For an end-of-sale platform, state which dependencies can be reused by the planned Catalyst migration and which require change. A nominal access-point replacement can fail when the surrounding platform was never inventoried. Keep the map with the asset rather than only in a one-time project file. Cisco names the Catalyst 9115AX family as the migration option in the lifecycle bulletin; map controller, power, cabling, mount and antenna changes before replacement.

Fault-domain separation

Build the acceptance record so power, wired link, controller join, radio state, authentication and application reachability can be reviewed independently. Preserve timestamps and device identifiers across switch and controller logs. When a test fails, identify the failing boundary before replacing hardware. This avoids classifying a cable, policy or controller problem as an access-point defect and creates evidence that can be reused during support escalation. Use controller, switch and client timestamps to separate a PoE/AUX limitation, CAPWAP issue, RF condition and authentication failure before declaring a hardware defect.

Lifecycle decision

Cisco ended sale of the Aironet 1850 Series on 1 May 2022, ended software maintenance on 1 May 2023 and lists 30 April 2027 as the last support date. Cisco identifies Catalyst 9115AX as the migration family. Available inventory does not extend those milestones.

Related Aironet 1852 order records

• AIR-AP1852E-Z-K9C - compare antenna form and domain evidence.
• AIR-AP1852E-T-K9 - compare antenna form and domain evidence.
• AIR-AP1852E-S-K9C - compare antenna form and domain evidence.

Official evidence: Cisco Aironet 1850 Series data sheet; Cisco Aironet 1850 hardware guide; Cisco Aironet 1850 lifecycle bulletin; and Cisco wireless compliance tool.