AIR-AP3802P-G-K9C - Cisco Aironet 3800p Access Point Configurable

AIR-AP3802P-G-K9C Order Identity

AIR-AP3802P-G-K9C is a Cisco Aironet 3800 Series, controller-based 802.11ac Wave 2 access point order. This exact SKU is a 3802P external-antenna access point, carries regulatory-domain token G, and uses a configurable single-unit order.

Antenna and quantity boundary

External antenna system required; verify the exact Cisco-supported antenna and connector arrangement. Treat the antenna design as an engineered item: retain the selected antenna, cable path, mounting method and regulatory approval with the access-point order.

This K9 order form represents one access point; antennas, mounting choices, power source and controller dependencies remain separate unless the authorized bill of materials states otherwise.

The C suffix marks a configurable order form. The final Cisco quotation must preserve the selected regulatory domain and any configuration choices; the suffix does not make the unit globally deployable.

Regulatory-domain control

The order carries regulatory-domain token G. Treat that token as an identifier, not a country name. Complete sales-destination evidence and local radio authorization against Cisco's current compliance resources before shipment or activation.

Cisco uses the variable regulatory-domain position in its ordering structure. Deployment eligibility must be checked for the destination country; this page does not infer a country mapping from token G.

Power budget

Confirm the switch port's negotiated PoE mode, available power, cable length and LLDP behavior. Keep the measured power result with commissioning evidence. Measure the power state after both radios and production features are active, not only while the unit is idle. Record switch model, port, power class, negotiated result and any feature reduction shown by the controller. If an injector is proposed, verify its Cisco support and place it in the maintained bill of materials.

Multigigabit uplink

The 3800 Series supports multigigabit Ethernet. Verify the switch port, cabling category, negotiated rate and error counters instead of assuming a 2.5 or 5 Gbps link. Commissioning should preserve the negotiated Ethernet rate, cable-test result, packet errors and switch configuration. Where the access switch is limited to 1 Gbps, state that design choice explicitly instead of presenting multigigabit capability as achieved throughput. Recheck negotiation after patch-cord or switch changes.

Software lifecycle

Check the target controller release against Cisco support documentation and the approved migration architecture before buying additional 3800 Series capacity. The lifecycle note should name the approved controller release, last tested release, security-maintenance owner and migration review date. Review Cisco notices before each expansion because available inventory does not extend software compatibility. A replacement design should cover controller, licensing, power, cabling and mounting rather than only the radio unit.

Replacement planning

Cisco lists the 3800 Series in its end-of-life notices. Record the permitted service horizon, replacement trigger and successor design with this purchase. Document the event that ends further 3802 deployment, the approved successor family and any controller coexistence constraint. Include funding, survey impact and installation sequencing. If the item is purchased as a spare, set a final-use date so old inventory does not silently outlive the network's supported architecture.

Migration dependency

Inventory controller, licensing, switch power, cabling and mounting dependencies that must change when the 3802 is replaced by a newer platform. Map the existing AP to its controller, licenses, authentication services, switch port, power budget, cable, bracket and monitoring objects. The successor plan should state which dependencies can be reused and which require change. This prevents a nominal AP replacement from failing because the surrounding platform was never inventoried.

Security baseline

Record the approved controller policy, management access, certificate handling and authentication test. Do not infer current security support from the hardware name alone. Retain the controller policy name, management authorization, certificate or trust workflow, authentication test and logging destination used at commissioning. Confirm the supported security behavior on the deployed software release. The hardware family alone must not be used to promise a feature or protocol that has not been validated.

Lifecycle and migration evidence

Cisco's support site lists an end-of-life announcement for the Aironet 3800 Series. Confirm current support dates, controller compatibility and the approved replacement path before treating available stock as suitable for a new deployment.

Related 3802P external-antenna access point records

• AIR-AP3802P-EK910C
• AIR-AP3802P-GK910C
• AIR-AP3802P-KK910C

Official evidence: Cisco Aironet 3800 Series data sheet, Cisco 3800 Series getting started guide, and Cisco end-of-life notices.