A99-48X10GE-1G-FC Cisco ASR 9900 48-Port 10G/1G FC Line Card
- 763 412 7282
- +86 010 69614620
A99-48X10GE-1G-FC Overview
A99-48X10GE-1G-FC 48-Port Dual-Rate Line Card
A99-48X10GE-1G-FC is Cisco's ASR 9900 48-port dual-rate 10 Gigabit and 1 Gigabit Ethernet Flexible Consumption line card. It supports a mix of Cisco SFP and SFP+ interfaces; it is not a 100GE card, complete router, optics bundle or software subscription.
Capacity and commercial model
Cisco specifies 480G of physical port capacity with 400-Gbps line-rate throughput and 480:400 oversubscription. Under the Flexible Consumption Model this PID starts with 200G enabled, so acceptance must reconcile both installed hardware and licensed capacity rather than treating all ports as immediately usable at full aggregate rate.
Chassis and interface checks
The A99 PID is compatible with ASR 9922, 9912, 9910, 9906 and 9904 chassis. Confirm the target IOS XR release, fabric and route-processor generation, approved SFP/SFP+ optics, airflow and slot plan. Cisco documents LAN-mode Layer 2, Layer 3, IP/MPLS, L2VPN and L3VPN support, subject to software and feature licensing.
Lifecycle and migration
Cisco ended sale on June 15, 2024 and lists June 30, 2029 as the last hardware-support date. The lifecycle bulletin names A99-4HG-FLEX-FC, a fifth-generation 400GE Flexible Consumption combo line card, as the replacement. It is not a drop-in equivalence: port media, optics, capacity licensing and chassis compatibility must be redesigned before migration.
Official evidence: Cisco dual-rate line-card data sheet, Cisco Flexible Consumption capacity table and Cisco exact PID lifecycle and replacement.
A99-48X10GE-1G-FC Specification
| Exact model / SKU | A99-48X10GE-1G-FC |
| Exact PID | A99-48X10GE-1G-FC |
| Hardware identity | ASR 9900 48-port dual-rate 10GE/1GE line card |
| Interfaces | 48 x SFP/SFP+ ports; mix of 1GE and 10GE |
| Physical port capacity | 480G |
| Line-rate throughput | 400 Gbps; 480:400 oversubscription |
| Initially enabled capacity | 200G under Flexible Consumption |
| Compatible chassis | ASR 9922, 9912, 9910, 9906 and 9904 |
| End of sale | 2024-06-15 |
| Last date of support | 2029-06-30 |
| Replacement PID | A99-4HG-FLEX-FC |
| Source match | A99-48X10GE-1G-FC: exact 48-port dual-rate hardware, 200G enabled capacity, ASR 9900 chassis set and lifecycle verified |
| Official manufacturer reference | Cisco A99-48X10GE-1G-FC data sheet |
A99-48X10GE-1G-FC Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
A99-48X10GE-1G-FC FAQ
What is A99-48X10GE-1G-FC used for?
A99-48X10GE-1G-FC Cisco ASR 9900 48-Port 10G/1G FC Line Card is a CISCO accessory or component in the ASR 9000 Series category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with A99-48X10GE-1G-FC?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with A99-48X10GE-1G-FC?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of A99-48X10GE-1G-FC?
The current reference price for A99-48X10GE-1G-FC is US$ 12,760.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related A99-48X10GE-1G-FC
A99-48X10GE-1G-SE Cisco ASR 9900 48-Port 10G/1G Service Edge Line Card
A99-48X10GE-1G-SE is Cisco’s 48-port dual-rate 10GE/1GE service-edge line card for the listed ASR 9900 chassis. The 48-port design has 400 Gbps line-rate throughput with 480:400 oversubscription; Cisco’s lifecycle notice lists end of sale on June 15, 2024.
Cisco A99-48X10GE-1G-TR ASR 9900 48-Port Dual-Rate Transport Line Card
A99-48X10GE-1G-TR is Cisco's ASR 9900 48-port dual-rate 10GE/1GE packet-transport line card using SFP+ and SFP optics.
Cisco A99-32X100GE-CM 32-Port 100GE Consumption Model Line Card
A99-32X100GE-CM is a fourth-generation Cisco ASR 9900 chassis line card with thirty-two 100GE QSFP28 interfaces. It is a hardware component, not a complete router, a pure software license or the A99-32HG-FC replacement. Cisco lists the CM part in EOL15321; manufacturer end of sale was 15 June 2024, with support subject to contract eligibility. The image is Cisco’s TR-family illustration, not a CM supplied-unit photograph.
Cisco A99-16X100GE-X-FC= 16-Port 100GE Flexible Consumption Line Card
A99-16X100GE-X-FC= is the Cisco ASR 9900 16-port 100GE Flexible Consumption line-card order listed in lifecycle bulletin EOL15321. It is a chassis component, not a complete router. The 16-port family supports QSFP-based interfaces; chassis fabric, route-processor and cooling requirements must be checked. Cisco ended manufacturer sales on 15 June 2024 and new service attachments on 15 June 2025. Existing contract coverage is separate from inventory availability. The image is Cisco’s SE-family illustration, not an FC spare or supplied-unit photo.
Cisco A99-32X100GE-X-SE ASR 9900 32-Port 100GE Service Edge Line Card
A99-32X100GE-X-SE is Cisco's ASR 9900 fifth-generation 3.2T Service Edge line card with 32 line-rate 100GE ports and QSFP-based 100GE, 40GE and 10GE interface modes.
Cisco A9K-9001-OPT-LIC= ASR 9001 Advanced Optical License
A9K-9001-OPT-LIC= is the Cisco ASR 9001 Advanced Optical License. It is a software-license order, not an Ethernet switch, router chassis or optical transceiver.
Cisco A9K-MPA-4X10GE — Four-port 10 GE modular port adapter
Cisco A9K-MPA-4X10GE is a four-port 10 Gigabit Ethernet modular port adapter. Cisco lists it for the ASR 9001 with IOS XR 4.2.1 or later; it is not a complete router.
Cisco A9K-DC-PEM-V2 — Version 2 DC power entry tray
A9K-DC-PEM-V2 is the Cisco ASR 9000 Version 2 DC power entry module, also described as the power tray. It is not the separate 2 kW DC output module installed in the power system.