SRX1500-AC - Juniper SRX power supplier Series
- 763 412 7282
- +86 010 69614620
SRX1500-AC Overview
SRX1500-AC Hardware and Power Configuration
SRX1500-AC is the AC-input configuration of Juniper's SRX1500 Firewall. Juniper positions the platform for enterprise campuses and small-to-midsize data-center perimeter security. The official product page lists maximum firewall performance of 9.2 Gbps and IPS performance of 3.3 Gbps; actual results depend on enabled services, traffic mix, software release and policy design.
AC Power and Redundancy Checks
The SRX1500 hardware guide specifies a 400 W AC power supply and supports a second matching AC supply for redundancy. AC and DC supplies must not be mixed in the same chassis. Buyers should confirm whether a second PSU, region-appropriate power cords, rack hardware and optics are included rather than assuming that the SRX1500-AC suffix defines every accessory.
Purchase Validation
- Confirm AC input rather than the SRX1500-DC configuration.
- Check installed Junos release, security subscriptions and support eligibility.
- Verify PSU count, power-cord region, rack kit and airflow condition.
- Validate required transceivers in Juniper's Hardware Compatibility Tool.
SRX1500-AC Specification
| Exact model / SKU | SRX1500-AC |
| Product type | SRX1500 next-generation firewall hardware |
| Power configuration | AC input; 400 W AC power supply documented by Juniper |
| Form factor | 1U rack-mount appliance |
| Maximum firewall performance | 9.2 Gbps (official platform maximum) |
| IPS performance | 3.3 Gbps (official platform figure) |
| Redundant power option | Second matching AC supply supported; do not mix AC and DC |
| Source match | Exact SRX1500 platform and AC power configuration |
| Official manufacturer reference | Juniper SRX1500 official product page |
| Datasheet series | Juniper SRX Series Services Gateways |
| Exact model | SRX1500-AC |
| Configuration check | Confirm port configuration, power option, airflow direction, licenses, optics and rack accessories |
| Lifecycle check | Confirm support status, firmware compatibility, warranty terms and project replacement requirements |
| Official datasheet | Juniper SRX Series official documentation |
| Model | SRX1500-AC |
| Brand | JUNIPER |
| Category | Juniper SRX Series Service Gateways |
| Product name | SRX1500-AC - Juniper SRX power supplier Series |
| Condition | New Factory Sealed |
| Supplier | YYST Global |
| Model | SRX1500-AC |
| Brand | JUNIPER |
| Product category | Juniper SRX Series Service Gateways |
| Product type | Enterprise security appliance |
| Condition | New Factory Sealed |
| Reference price | US$ 2890.00 reference price |
| Official manufacturer reference | Juniper SRX Series official documentation |
SRX1500-AC Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
SRX1500-AC FAQ
What is SRX1500-AC?
SRX1500-AC - Juniper SRX power supplier Series is a JUNIPER SRX Series Service Gateways product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What are the power requirements for SRX1500-AC?
For SRX1500-AC, the manufacturer specification lists power configuration as AC input; 400 W AC power supply documented by Juniper.
Is SRX1500-AC available from YYST Global?
Contact YYST Global to confirm availability for SRX1500-AC, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
What is the price of SRX1500-AC?
The current reference price for SRX1500-AC is US$ 2,890.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related SRX1500-AC
SRX1500-AC-TAA Juniper TAA-compliant SRX1500 AC firewall hardware
SRX1500-AC-TAA is TAA-compliant SRX1500 AC firewall hardware. This hardware SKU does not establish a Junos entitlement, support contract, optics or recurring security services. The compliance owner verifies origin documents, exact SKU and serial before operations connects the appliance. Technical acceptance then maps the two AC supplies to independent failure domains and records a one-feed test. Junos entitlement, rack contents, optics, support and subscriptions require explicit quote confirmation; none should be inferred from the TAA hardware label.
Juniper SRX1500-SYS-JB-AC Services Gateway
SRX1500-SYS-JB-AC is a Juniper security services gateway with AC power and Junos Base software. It is a complete system, not a switch module; the documented configuration has sixteen Gigabit Ethernet and four 10 Gigabit Ethernet interfaces.
SRX1500-DC-TAA Juniper TAA-compliant SRX1500 firewall hardware in the DC power configuration
SRX1500-DC-TAA is TAA-compliant SRX1500 firewall hardware in the DC power configuration. This hardware SKU does not establish a Junos entitlement, support contract, optics or recurring security services. Start with regulated sourcing evidence and a substitution-control decision, then hand the accepted unit to facilities for grounding, polarity and breaker validation. Keep compliance, electrical and software-entitlement records as separate signed artifacts tied to one serial. Reject or quarantine a unit when any one record is missing, even when the chassis boots successfully.
SRX1500-DC Juniper SRX1500 firewall hardware in the DC power configuration
SRX1500-DC is SRX1500 firewall hardware in the DC power configuration. This hardware SKU does not establish a Junos entitlement, support contract, optics or recurring security services. Treat this as a hardware procurement record. Before energizing, document grounding lug, conductor, polarity, breaker and A/B feed labels. Separately match a valid Junos package to the serial and stage the configuration image. A successful DC power test does not prove software entitlement, security subscriptions or production readiness.
SRX1500-SYS-JE-AC Juniper SRX1500 1U firewall system with AC power and the historical Junos Software Enhanced package
SRX1500-SYS-JE-AC is SRX1500 1U firewall system with AC power and the historical Junos Software Enhanced package. Support, optics, interface modules and recurring security services are separate unless the quote explicitly includes them. Document why application-aware controls are required and whether the target Junos release still uses the legacy JSE entitlement. Test approved application identification and policy action, then remove one AC feed and verify logging continuity. Signature updates, support and current successor licensing must be confirmed independently of the redundant hardware.
SRX1500-SYS-JB-DC Juniper SRX1500 1U firewall system with DC power and Junos Software Base
SRX1500-SYS-JB-DC is SRX1500 1U firewall system with DC power and Junos Software Base. Support, optics, interface modules and recurring security services are separate unless the quote explicitly includes them. Facilities must sign off grounding, breaker isolation, polarity, cable gauge and feed labels before security commissioning. Bind the base entitlement to the serial, validate routing, NAT, firewall and IPsec, then perform a controlled one-feed test. Keep electrical evidence separate from policy evidence so each failure has a clear owner and rollback path.
SRX1500-SYS-JE-DC Juniper SRX1500 1U firewall system with DC power and the historical Junos Software Enhanced package
SRX1500-SYS-JE-DC is SRX1500 1U firewall system with DC power and the historical Junos Software Enhanced package. Support, optics, interface modules and recurring security services are separate unless the quote explicitly includes them. This configuration needs three independent approvals: DC installation, legacy enhanced-software compatibility and application-signature entitlement. After polarity and grounding checks, validate application identification with safe traffic and observe logs while one DC feed is removed. Record the current replacement license because JSE orderability and feature treatment can change by Junos release.