S3700-52P-SI-AC
- 763 412 7282
- +86 010 69614620
S3700-52P-SI-AC Overview
Define the access speed before choosing a higher port count
Forty-eight Ethernet 10/100 ports provide the access layout stated for this exact order. Adding ports to a replacement specification should preserve the required endpoint rate, not assume that the S3700 name or 52P suffix implies Gigabit access. Record the number of occupied and planned access connections and compare their rate requirements with this manufacturer description. The four Gigabit SFP interfaces form a separately identified optical group.
Use the SI-AC order and the power label in the procurement record
BOM 02352370 connects the full S3700-52P-SI-AC model to AC 110/220 V in the hardware table. Require that identity on the supplier order and inspect the offered unit label instead of relying on a similar-looking model photograph. Check the destination supply and included power cable. Any required installation hardware, optical modules or additional equipment should be listed in the quotation so that a matched-parts reference is not mistaken for the shipping contents.
Specify the selected single-mode uplink module
The exact matched list includes SFP-GE-LX-SM1310 / 02315200, described as a GE single-mode module at 1310 nm with 10 km stated distance and LC connector. S-SFP-GE-LH40-SM1310 / 02317346 is another listed GE single-mode module, also at 1310 nm and LC, with 40 km stated distance. Choose a module against the actual fibre path, supported interface, link-loss requirement and far-end optic. Those module-specific distances do not establish a measured installation result or mean that either optic is supplied with the chassis.
Qualify the software and any multi-switch design separately
V100R005C01 is the first supported version shown in this chassis and optical-module mapping. It is not the installed software version and does not by itself qualify an existing multi-switch design. Record the actual release and verify the applicable configuration, approved connection media and service arrangements before installation. Where a project includes stacking, obtain its exact software and hardware requirements and acceptance procedure; retain the full switch identity and test the planned topology rather than relying on a shared series label.
Document/Firmware Download
S3700-52P-SI-AC Specification
| Manufacturer order code | S3700-52P-SI-AC |
| Mapped chassis BOM | 02352370 |
| Access interface group | 48 Ethernet 10/100 ports |
| Gigabit optical group | 4 Gigabit SFP interfaces |
| Power input in exact order | AC 110/220 V |
| Matched GE 10 km module | SFP-GE-LX-SM1310 / 02315200: single-mode, 1310 nm, 10 km, LC |
| Matched GE 40 km module | S-SFP-GE-LH40-SM1310 / 02317346: single-mode, 1310 nm, 40 km, LC |
| First supported version | V100R005C01; not evidence of the installed software release |
| Design acceptance boundary | Verify actual software, selected interfaces and any planned multi-switch topology |
| Quoted delivery contents | Confirm chassis, optics, power cable and mounting items; matched parts are not included-scope proof |
| Image match level | Exact-model manufacturer reference; not evidence of the offered unit, condition or fitted optics |
S3700-52P-SI-AC Warranty
 | Product Quotation |  | Condition and Packaging |
 | Return Eligibility |  | Returns and Replacement |
 | Shipping Arrangements |  | Warranty Terms |
S3700-52P-SI-AC FAQ
What is S3700-52P-SI-AC?
S3700-52P-SI-AC is a HUAWEI S3700 Series Switches product supplied by YYST Global for enterprise IT procurement and infrastructure projects.
What interfaces and ports does S3700-52P-SI-AC provide?
For S3700-52P-SI-AC, the manufacturer specification lists access interface group as 48 Ethernet 10/100 ports.
What are the power requirements for S3700-52P-SI-AC?
For S3700-52P-SI-AC, the manufacturer specification lists power input in exact order as AC 110/220 V.
Is S3700-52P-SI-AC available from YYST Global?
Contact YYST Global to confirm availability for S3700-52P-SI-AC, the required quantity, exact configuration, delivery destination and current lead time before ordering. A product listing does not confirm current inventory.
What is the price of S3700-52P-SI-AC?
The current reference price for S3700-52P-SI-AC is US$ 611.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related S3700-52P-SI-AC
S3700-52P-EI-AC
S3700-52P-EI-AC is Huawei chassis BOM 02352355, an AC 110/220 V switch with 48 Ethernet 10/100 access ports and four Gigabit SFP interfaces. The 52P ordering identity does not mean that all connections operate at Gigabit speed. Match the copper access group and optical uplinks to the replacement cabling plan, and request the exact EI-AC order and separately selected optical modules.
S3700-52P-PWR-EI
Huawei S3700-52P-PWR-EI is chassis BOM 02352373: 48 Ethernet 10/100 PoE+ ports and four Gigabit SFP interfaces. The manufacturer explicitly describes this ordering line as without a power module. Specify the required power module separately when requesting this PoE chassis; its access ports are Fast Ethernet, while the four SFP interfaces are Gigabit.
S3700-52P-EI-24S-AC
S3700-52P-EI-24S-AC, Huawei chassis BOM 02352362, combines 24 Ethernet 10/100 ports with 24 Fast Ethernet SFP positions and four Gigabit SFP positions. Huawei specifies AC 110/220 V in this exact ordering line. The 24S variant has a mixed copper-and-fibre access layout, so the replacement specification must distinguish its 100 Mb/s access connections from the four Gigabit optical interfaces.
S3700-52P-EI-48S-AC
S3700-52P-EI-48S-AC is Huawei S3700-EI chassis BOM 02352375. Its optical interface layout comprises 48 Fast Ethernet SFP positions and four Gigabit SFP positions, with AC 110/220 V in the manufacturer order description. This 48S variant suits a specification that calls for many 100 Mb/s optical access connections; it should not be quoted as a bank of 48 Gigabit access ports.
S3700-52P-EI-DC
S3700-52P-EI-DC is a Huawei S3700 switch identified by manufacturer BOM 02352358. Huawei lists 48 Ethernet 10/100 ports, four Gigabit SFP ports and DC −48 V for this exact model. It provides Fast Ethernet access with separate Gigabit optical connections; the DC version must be matched to the site power system and the quoted chassis label.
Huawei S3700-52P-PWR-SI 48-Port FE PoE Switch 02354132
Huawei S3700-52P-PWR-SI (02354132) is an S3700-SI PoE switch with 48 Fast Ethernet copper ports, four Gigabit SFP uplinks, dual power slots and one included 500 W AC power module.
S3700-28TP-EI-AC
Huawei S3700-28TP-EI-AC is the AC 110/220 V ordering variant mapped to chassis BOM 02352344. Its interface layout contains 24 Ethernet 10/100 ports, two Gigabit SFP interfaces and two dual-purpose 10/100/1000-or-SFP interfaces. Specify the exact AC model, required access speed and chosen uplink media when replacing an existing S3700 installation; the dual-purpose positions each represent a media choice.
S3700-28TP-EI-MC-AC
Huawei identifies S3700-28TP-EI-MC-AC as chassis BOM 02352374, with 24 Ethernet 10/100 ports, two Gigabit SFP interfaces, two dual-purpose 10/100/1000-or-SFP interfaces and two MC ports. Its exact ordering description specifies AC 110/220 V. Retain the MC-AC suffix when requesting a replacement, and verify the intended MC connection separately from the Ethernet and optical interface plan.