FS-124F-POE-Fortinet Network Layer 2 FortiGate 24GE ports Entry Level Switch

Assign powered endpoints to the first twelve copper ports

This POE order supplies power on RJ45 positions 1–12, while all 24 copper interfaces carry Gigabit Ethernet traffic. Positions 13–24 remain data connections without the specified PoE output. Put the powered cameras, phones or wireless access points on the eligible group and add their requested wattage against the 185 W aggregate limit. A 24-port chassis does not imply 24 powered endpoints: the separate FS-124F-FPOE order provides 24 PoE ports and a 370 W budget.

Reserve the four optical connections for the required uplink design

The exact front-panel guide numbers its 10Gbps SFP+ connections 25–28 and identifies positions 21–28, across copper and optical groups, for FortiLink interface connections. Confirm whether the deployment uses controller management or standalone switching before assigning those links. Select compatible optics and the required link speed for the actual network. The dedicated RJ45 console connects a management computer for CLI access; it is separate from the 24 copper data interfaces.

Allow for the powered rack chassis and cooling path

The manufacturer specifies a 1RU rack chassis, 44 x 260 x 440 mm in height, depth and width, with a built-in 100–240 V AC supply. Its airflow runs from the side toward the rear, and its specification is not fanless. Keep the side intake and rear exhaust clear in the proposed cabinet. The 185 W figure is the endpoint power-output budget, not the switch’s AC-input consumption. Check the actual power lead, rack brackets and installation clearance in the quotation.

Use the exact switch limits when replacing an existing configuration

Fortinet’s 124F-POE datasheet column allows eight members in each link-aggregation group and 16 groups in total. Count the existing bundles and their physical members separately when preparing a replacement configuration, then check that both requirements fit these limits. FS-124F-POE also appears in the versioned FortiSwitchOS 7.4.6 supported-model list. That entry establishes a documented software reference; it does not guarantee a controller pairing, included support, current inventory or the condition of the unit being quoted.

Document/Firmware Download

• Fortinet access-switch datasheet: exact 124F-POE column and order
• Official 124F-series quick-start guide: POE port placement and FortiLink labels
• FortiSwitchOS 7.4.6 introduction: FS-124F-POE model reference

The image is the manufacturer’s labelled 124F-POE illustration extracted from datasheet page 12. It shows the model design and does not establish the condition or accessories of the offered unit.