FORTINET FN-CABLE-QSFP56-DAC-L1 Transceiver Modules
- 763 412 7282
- +86 010 69614620
FN-CABLE-QSFP56-DAC-L1 Buying Guide
Fortinet FN-CABLE-QSFP56-DAC-L1 QSFP56 Cable is listed by YYST Global for buyers looking for FORTINET Transceiver Modules. FN-CABLE-QSFP56-DAC-L1: One-metre 200G adjacency link; exact passive copper length, form factor and bend requirement verified in Fortinet's official table. The listed condition is New Factory Sealed. The reference price is US$ 206.00. Contact our sales team to validate compatibility, scope, fulfillment and lead time before ordering.
- Model: FN-CABLE-QSFP56-DAC-L1
- Brand: FORTINET
- Category: Fortinet Transceiver Modules
- Condition: New Factory Sealed
- Reference price: US$ 206.00
FN-CABLE-QSFP56-DAC-L1 Overview
One-metre 200G adjacency link
FN-CABLE-QSFP56-DAC-L1: Use this QSFP56 assembly only when two native 200G ports are close enough for a one-metre fixed route. Mark cage orientation and the 35 mm bend envelope on the rack elevation before ordering. At acceptance, capture both host models, port modes, link training, error counters and bidirectional traffic. The short cable is intended to remove unnecessary service loops, not to be stretched across moving rails or doors.
Official Fortinet source: Fortinet Transceivers and Cables official data sheet.
FN-CABLE-QSFP56-DAC-L1 Specification
| Exact model / SKU | FN-CABLE-QSFP56-DAC-L1 |
| Exact Fortinet SKU | FN-CABLE-QSFP56-DAC-L1 |
| Engineering use | One-metre 200G adjacency link |
| Route purpose | One-metre same-rack or immediately adjacent 200G connection |
| Bend envelope | 35 mm minimum radius with no chassis-door pressure |
| Host proof | Native QSFP56 200G mode at both ends |
| Acceptance | Link training, counters and bidirectional traffic |
| Source match | FN-CABLE-QSFP56-DAC-L1: One-metre 200G adjacency link; independent route and acceptance evidence |
| Official manufacturer reference | Fortinet Transceivers and Cables official data sheet |
FN-CABLE-QSFP56-DAC-L1 Ordering Information
This listing is an accessory or component and may not include the main device. Confirm the supported platform, connector or form factor, included quantity, hardware revision and required mounting or installation parts before ordering.
Document/Firmware Download
FN-CABLE-QSFP56-DAC-L1 FAQ
What is FN-CABLE-QSFP56-DAC-L1 used for?
Fortinet FN-CABLE-QSFP56-DAC-L1 QSFP56 Cable is a FORTINET accessory or component in the Transceiver Modules category. It may require a compatible main device and should not be treated as a complete standalone system.
Which products are compatible with FN-CABLE-QSFP56-DAC-L1?
Compatibility depends on the exact parent platform, chassis or device revision. Provide the installed model and required quantity so YYST Global can check fit before ordering.
What is included with FN-CABLE-QSFP56-DAC-L1?
Confirm whether the quotation includes only the named component or also includes cables, brackets, optics, licenses or installation hardware. Package contents vary by part number and condition.
What is the price of FN-CABLE-QSFP56-DAC-L1?
The current reference price for FN-CABLE-QSFP56-DAC-L1 is US$ 206.00. Final pricing can change based on stock, quantity, configuration and delivery destination.
Related products
Related FN-CABLE-QSFP56-DAC-L1
Fortinet FN-CABLE-QSFP56-DAC-LB5 QSFP56 Cable
FN-CABLE-QSFP56-DAC-LB5: 2.5-metre 200G cross-rack route; exact passive copper length, form factor and bend requirement verified in Fortinet's official table.
Fortinet FN-CABLE-QSFP28-5 QSFP28 Cable
FN-CABLE-QSFP28-5 is Fortinet's five-metre 100G passive copper link: passive twinax copper with included cable-end transceivers, 5 m length and 25 mm minimum bend radius.
Fortinet FN-CABLE-QSFP28-1 QSFP28 Cable
FN-CABLE-QSFP28-1 is Fortinet's one-metre 100G rack-local DAC: passive twinax copper with included cable-end transceivers, 1 m length and 25 mm minimum bend radius.
Fortinet FN-CABLE-QSFP28-4SFP28-3 QSFP28 Cable
FN-CABLE-QSFP28-4SFP28-3 is Fortinet's 100G-to-four-25G three-metre breakout: passive twinax copper with included cable-end transceivers, 3 m length and 30 mm minimum bend radius.
Fortinet FN-CABLE-QSFP28-4SFP28-5 QSFP28 Cable
FN-CABLE-QSFP28-4SFP28-5 is Fortinet's 100G-to-four-25G five-metre breakout: passive twinax copper with included cable-end transceivers, 5 m length and 30 mm minimum bend radius.
Fortinet FN-CABLE-QSFP28-4SFP28-1 QSFP28 Cable
Fortinet FN-CABLE-QSFP28-4SFP28-1 is a 1 m passive direct-attach breakout cable from one 100GE QSFP28 end to four 25GE SFP28 ends, with the cable-end transceivers included.
Fortinet FN-CABLE-QSFP28-AOC-10-2PACK QSFP28 Cable
FN-CABLE-QSFP28-AOC-10-2PACK is a Fortinet QSFP28 cable orderable item. The available official source is the related Fortinet transceiver series document. Confirm endpoint compatibility and the exact model before purchase.
Fortinet FN-CABLE-QSFP+7-4PACK QSFP+ Cable
FN-CABLE-QSFP+7-4PACK is a Fortinet QSFP+ cable orderable item. Its current official ordering description is cited on this page. Confirm endpoint compatibility and the exact model before purchase.
ISO 9001 · ISO 14001 · ISO 45001
ISO 20000 · ISO 27001 · D&B